User's Manual

D
Select Delete.
Use C/D to select, and then press A.
E
Select Yes.
Use C/D to select, and then press A.
F
After deleting, display the recall
screen.
Note:
To continue deleting history data, repeat steps 2 to
5.
G
Finish deleting history data.
Hold down A.
The time screen is displayed.
c
Important:
Even if you delete unnecessary measurement
data, the memory on the device is not cleared. If
the free space on the device is full, saved data is
removed in order starting with the oldest data. Be
aware that data will be deleted when the memory
is full. Initialise the device to clear the memory.
U “Sys. Settings” on page 113
To clear all of the history, you need to Initialise the
device. When initialising, all setting information for
User Settings, Sys. Settings, and Measure set. is also
Initialised along with the history information.
U “Sys. Settings” on page 113
SF-710/510/310 User Manual
Checking Measurement Data (Recall Function)
65