Product specifications

Epson Stylus Photo RX580
11/06 Epson Stylus Photo RX580 - 7
Print Settings for Copying
You can choose from various sizes and types of Epson paper
and other settings to get just the results you want.
1. Press the
Copy mode button.
2. Press the x
Print Settings button.
3. Press u or d to select a menu item, then press the r button.
4. Press u or d to select one of the following print settings,
then press
OK.
❏
Zoom: Select Actual to print your photo at its original
size. You can reduce or enlarge your original by a
specific percentage using the
Copies + or – buttons. Or
select
Auto Fit Page for borderless printing and resizing
the image to fit standard paper sizes.
❏
Paper Type: Select the type of paper you loaded. See
“Selecting the Paper Type Setting When You Print or
Copy Without a Computer” on page 8 for a list of
Epson papers and the corresponding Paper Types.
❏
Paper Size: Select the paper size you loaded.
❏
Quality: Select Draft, Standard or Best.
❏
Copy Density: Make your copies darker or lighter.
❏
Expansion: When you print borderless photos, your
image is slightly expanded and cropped to fill the sheet
of paper. If too much of your photo edges are cut off,
select
Mid or Min. If you see a white edge on your
photo, leave it set on
Standard.
Reprinting Photos and Restoring Color
If you have faded photos (up to 5 × 7 inches), you can bring
them back to life using the Color Restoration feature.
For photos that are not faded, you can follow the same steps to
crop and resize your pictures or even change a color photo to
black and white.
1. Place one or two photos on the scanner glass in the
direction shown, making sure they are at least 1/4 inch apart
and 1/4 inch from the edges of the glass.
2. Load your photo paper.
3. Press the
Specialty Print button.
4. Press l or r to highlight
Reprint/Restore Photos, then
press
OK.
5. Press r, use the u or d buttons to set
Restoration On,
then press
OK. (If you want to reprint photos that don’t
need color restoration, choose
Off).
6. Press
OK again. When you see a message about the
placement of your photos, press
OK.
The photo(s) are scanned and restored. You see a preview
on the LCD screen.
7. If you want to crop your photo, press the
Display/Crop
button and adjust the size and position of the yellow box.
8. If you’re copying two photos, press r to preview the second
photo. Repeat step 7 if you want to crop the second photo.
9. Press the x
Print Settings button.
Repeat Copy
Prints a photo at actual size as many
times as it will fit on one sheet.
Repeat-4
Prints a photo four times on one
sheet.
Layout Setting for Copying Result
1/4 inch
1/4 inch
1/4 inch