User Manual

Table Of Contents
Copying on a CD/DVD Label
You can copy a disc label or a square original such as a photo onto a CD/DVD label.
c
Important:
Before printing on the CD/DVD, see the CD/DVD handling precautions.
Do not insert the CD/DVD tray while the printer is operating. is may damage the printer.
Do not insert the CD/DVD tray until you are instructed to do so. Otherwise, an error occurs and the CD/DVD is
ejected.
1.
Select Various print s on the home screen.
2. Select Copy to CD/DVD > Copy to CD/DVD.
3. Place the original following the instructions displayed on the screen, and then select Proceed to set up Outer/
Inner..
4. Specify the inner diameter and the outer diameter using
u
or
d
, and then select Select Type.
You can also select within the frame of the inner diameter and outer diameter, and then enter the value using
the on-screen keypad.
Note:
You can set 114 to 120 mm as the outer diameter, and 18 to 46 mm as the inner diameter in 1 mm increments.
e outer diameter and the inner diameter you set are restored to their defaults aer printing the disc label. You
need to set these diameters every time you print.
5. Select Print on CD/DVD.
Note:
To make a test print, select Test print on A4 paper, and then load A4 plain paper in the paper cassette. You can check
the printout image before printing on a CD/DVD label.
User's Guide
Copying
136