User Manual

Table Of Contents
Note:
You cannot use ADF when scanning from Photo Mode.
2. Start Epson Scan 2.
3.
Select Photo Mode from the Mode list.
4. Make the following settings on the Main Settings tab.
Image Type: Select the color for saving the scanned image.
Resolution: Select the resolution.
Note:
e
Document Source setting is
xed
as Scanner Glass, and the Document Type setting is
xed
as
Reective
.
(Reective means originals which are not transparent, for example ordinary papers or photos.) You cannot change these
settings.
User's Guide
Scanning
154