User Manual

Table Of Contents
6. Enter the password displayed on the printer's control panel on the computer or smart device.
Note:
When you enable Wi-Fi Direct, it remains enabled unless you restore the default network settings and disable Wi-Fi
Direct.
7. Aer the connection is established, tap OK on the printer's control panel.
8.
Tap Close.
Related Information
&
“Checking the Network Connection Status” on page 44
& “Changing the Wi-Fi Direct (Simple AP) Settings” on page 53
& When You Cannot Make Network Settings” on page 224
Making Advanced Network Settings
You can change the network device name, TCP/IP setup, proxy server and so on. Check your network environment
before making changes.
1. Tap Settings on the home screen.
2. Tap Network Settings > Advanced.
3. Select the menu item for settings, and then select or specify the setting values.
4. Tap Start Setup.
Related Information
&
“Setting Items for Advanced Network Settings” on page 43
Setting Items for Advanced Network Settings
Select the menu item for settings, and then select or specify the setting values.
Device Name
You can enter the following characters.
Character limits: 2 to 15 (you must enter at least 2 characters)
Usable characters: A to Z, a to z, 0 to 9, -.
Characters you cannot use at the top: 0 to 9, -.
Characters you cannot use at the bottom: -
User's Guide
Network Settings
43