User Manual

Table Of Contents
Disabling Wi-Fi from the Control Panel
When Wi-Fi is disabled, the Wi-Fi connection is disconnected.
1. Tap
on the home screen.
2. Tap Wi - Fi ( R e c o m m e n d e d ) .
e network status is displayed.
3.
Tap Change Settings.
4.
Tap Others > Disable Wi-Fi.
5. Check the message, and then tap Start Setup.
6. When a completion message is displayed, tap Close.
e screen automatically closes aer a specic length of time if you do not tap Close.
7. Tap Close
Disconnecting Wi-Fi Direct (Simple AP) Connection
from the Control Panel
Note:
When Wi-Fi Direct (Simple AP) connection disabled, all computers and smart devices connected to the printer in Wi-Fi
Direct (Simple AP) connection are disconnected. If you want to disconnect a specic device, disconnect from the device
instead of the printer.
1. Tap on the home screen.
2. Tap Wi - Fi D i r e c t .
e Wi-Fi Direct (Simple AP) information is displayed.
3. Tap Change Settings.
4. Tap Disable Wi-Fi Direct.
5. Check the message, and then tap Disable the settings.
6. When a completion message is displayed, tap Close.
e screen automatically closes aer a specic length of time if you do not tap Close.
7. Tap Close.
User's Guide
Network Settings
54