User Manual

Table Of Contents
10. Check the paper size and paper type settings displayed on the control panel. To use the settings, tap Close. To
change the settings, tap the item that you want to change, and then go to the next step.
Note:
By registering frequently used combinations of paper size and paper type as a favorite, you do not need to set them
each time. You can make paper settings just by tapping the registered preset.
To register a preset, tap Favorite Paper Settings , tap > on the next screen and then specify the paper size and paper
type.
e paper setting screen is not displayed if you have disabled Paper Conguration in the following menus. In this
situation, you cannot print from an iPhone or iPad using AirPrint.
Settings > Printer Settings > Paper Source Setting > Paper Conguration
11. Check the settings, and then tap Close.
Note:
e output tray slides out automatically when printing starts. You can slide it out manually before printing starts.
Related Information
&
“Paper Handling Precautions” on page 56
& “Available Paper and Capacities” on page 57
&
“Menu Options for Printer Settings” on page 184
Loading Paper in the Rear Paper Feed Slot
c
Important:
Do not load paper in the rear paper feed slot until the printer prompts you to do so. Doing so will result in the blank
paper being ejected.
1.
Do one of the following.
When printing from the control panel: Select rear paper feed slot as the Paper Source Setting setting, make
other print settings, and then press the
x
button.
When printing from a computer: Select rear paper feed slot as the Paper Source setting, make other print
settings, and then click Print.
2. A message is displayed on the control panel telling you that the printer is preparing, and then you are
instructed to load paper. Follow the instructions below to load the paper.
User's Guide
Loading Paper
69