User`s manual

1: 13504CFG.EXE CONFIGURATION PROGRAM

UTILITIES (S19A-B-001-03)

EPSON

3-7

Panel

Panel Setup

When Panel is selected from the Device menu, the Panel Setup dialog box is displayed. To select a

panel assignment, highlight it (in the example window below, “STN 4 Bit Mono Single 320 x 240”

is highlighted) and click OK. If the highlighted panel assignment needs changes, click Edit and see

the next section “Edit Panel Setup.”

Whenever a panel assignment is edited or selected in the Panel Setup dialog box, the setup is copied

to Current Conﬁguration. The editing is automatically performed on the current conﬁguration.

In addition to OK, Cancel, and Edit commands, a Help command is listed in the Panel Setup win-

dows. In this version of 13504CFG, the Help ﬁles are unavailable.

Figure 1-8 13504CFG Panel Setup

Edit Panel Setup

When a selection is highlighted in the Panel Setup window and Edit is clicked, the Edit Panel Setup

window is displayed. The Edit Panel Setup window lists parameters which can be edited, as shown

below in Figure 1-9, “13504CFG Edit Panel Setup.” In this example window, “X Resolution: 320

pixels” is highlighted.

Figure 1-9 13504CFG Edit Panel Setup

Panel Parameter Edit

When a selection is highlighted for editing in the Edit Panel Setup window and Edit is clicked, the

Panel Parameter Edit window displays for parameter editing. See Figure 1-10, “13504CFG Panel

Parameter Edit” below. In this example window, “X Resolution: 320 pixels” can be edited.

Figure 1-10 13504CFG Panel Parameter Edit