User`s manual

7: 13504PWR SOFTWARE SUSPEND POWER SEQUENCING UTILITY
3-26 EPSON UTILITIES (S19A-B-001-03)
7 13504PWR SOFTWARE SUSPEND POWER
SEQUENCING UTILITY
The 13504PWR Software Suspend Power Sequencing Utility enables or disables the S1D13504
software suspend mode and LCD.
Refer to the section titled “LCD Power Sequencing and Power Save Modes” in the “S1D13504 Pro-
gramming Notes and Examples,” document number S19A-G-002-xx. Also, refer to the “S1D13504
Hardware Functional Specification,” document number S19A-A-002-xx for further information.
The 13504PWR display utility must be configured and/or compiled to work with your hardware
platform. Consult documentation for the program 13504CFG.EXE which can be used to configure
13504PWR.
This software is designed to work in both embedded and personal computer (PC) environments. For
the embedded environment, it is assumed that the system has a means of downloading software from
the PC to the target platform. Typically this is done by serial communications, where the PC uses a
terminal program to send control commands and information to the target processor. Alternatively,
the PC can program an EPROM, which is then placed in the target platform. Some target platforms
can also communicate with the PC via a parallel port connection, or an Ethernet connection.
7.1 S1D13504 Supported Evaluation Platforms
13504PWR has been tested with the following S1D13504 supported evaluation platforms:
• PC system with an Intel 80x86 processor.
• M68332BCC (Business Card Computer) board, revision B, with a Motorola MC68332 processor.
• M68EC000IDP (Integrated Development Platform) board, revision 3.0, with a Motorola
M68EC000 processor.
• SH3-LCEVB board, revision B, with an Hitachi SH-3 HD6417780 processor.
If the platform you are using is different from the above, please see the “S1D13504 Programming
Notes and Examples,” document number S19A-G-002-xx.
7.2 Installation
PC platform: copy the file 13504PWR.EXE to a directory that is in the DOS path on your hard
drive.
Embedded platform: download the program 13504PWR to the system.
7.3 Usage
PC platform: at the prompt, type 13504pwr [/software  /lcd] [/enable  /disable] [/i] [/?].
Embedded platform: execute 13504pwr and at the prompt, type the command line argument.
Where: /software selects software suspend
/lcd selects the LCD
/enable activates software suspend or the LCD
/disable deactivates software suspend or the LCD
/i initializes registers
/? displays this usage message