Installation guide

2. Installation

RC180 Safety and Installation Rev.19

G3 : Table Top Mounting-

CAUTION

■

Install the Table Top Mounting Manipulator with two or more people.

The Manipulator weights are as follows. Be careful not to get

hands, fingers, or feet caught and/or have equipment damaged by

a fall of the Manipulator.

G3-251* : approx. 14 kg: 31 lb.

G3-301* : approx. 14 kg: 31 lb.

G3-351* : approx. 14 kg: 31 lb.

10 mm

4-M8

Screw Hole

(depth 20 mm

or more)

Spring

Washer

Plane

Washer

(1) Secure the base to the base table

with four bolts.

Use bolts with specifications

conforming to ISO898-1 Property

Class: 10.9 or 12.9.

(2) Using nippers, cut off the wire tie

binding the shaft and arm

retaining bracket on the base.

(3)

Remove the bolts securing the

wire ties removed in step (2).

(4) Remove the shipping bolt and

jigs.

)

NOTE

Bolt

:M4

Wire tie

Sheet