Installation guide

2. Installation

RC180 Safety and Installation Rev.19

G3 : Multiple Mounting

■

Install the Multiple Mounting Manipulator with two or more people.

The Manipulator weights are as follows. Be careful not to get

hands, fingers, or feet caught and/or have equipment damaged by

a fall of the Manipulator.

G3-301*M : approx. 14 kg: 31 lb.

G3-351*M : approx. 14 kg: 31 lb.

WARNING

■

When installing the Manipulator to the wall, support the

Manipulator, and then secure the anchor bolts. Removing the

support without securing the anchor bolts properly is extremely

hazardous and may result in fall of the Manipulator.

(1)

Unpack the manipulator with

retaining the arm posture.

(2)

Secure the base to the wall with

four bolts.

Use bolts with specifications

conforming to ISO898-1 Property

Class: 10.9 or 12.9.

(3) Remove the shipping bolt and

jigs.

4-M8

Screw Hole

(depth 20 mm or more)

Spring Washer

Plane Washe

)

NOTE