User's Guide CMP0118-00 EN
SC-F2100 Series User's Guide Copyrights and Trademarks Copyrights and Trademarks No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson printer. Epson is not responsible for any use of this information as applied to other printers.
SC-F2100 Series User's Guide Contents Contents Using Pre-treatment Liquid. . . . . . . . . . . . . . . Fixating the Pre-treatment Liquid (Heat Press) ................................... Creating and Sending Jobs. . . . . . . . . . . . . . . . . . Workflow for Creating and Sending Jobs. . . . . Notes on Receiving Jobs. . . . . . . . . . . . . . . . . Preparing the Platen. . . . . . . . . . . . . . . . . . . . . . Attaching/Removing a Grip Pad. . . . . . . . . . .
SC-F2100 Series User's Guide Contents Replacing White Ink. . . . . . . . . . . . . . . . . . . . . . Prolonged Storage. . . . . . . . . . . . . . . . . . . . . . . . Checking for clogged nozzles. . . . . . . . . . . . . . . . Loading media. . . . . . . . . . . . . . . . . . . . . . . . Printing a Nozzle Check Pattern. . . . . . . . . . . Cleaning the print head. . . . . . . . . . . . . . . . . . . . Notes on head cleaning. . . . . . . . . . . . . . . . . . Cleaning the print head. . . . . . . . . . . . .
SC-F2100 Series User's Guide Introduction Manual Organization Introduction The manuals for the product are organized as shown below. Viewing the Manuals You can view the PDF manuals using Adobe Reader or Preview (macOS). Meaning of Symbols Warning: Caution: c Important: Note: U Setup Guide (booklet) This manual provides information on how to setup the printer after unpacking it from the box. Make sure you read this manual to perform operations safely.
SC-F2100 Series User's Guide Introduction C Viewing PDF Manuals Select Online Manual from the screen displayed. The Web browser launches, and the Online Manual top page is displayed. This section uses the Adobe Acrobat Reader as an example to explain the basic operations for viewing the PDF in Adobe Acrobat Reader DC. Click the manual or item you want to view. Viewing Video Manuals The video manuals have been uploaded to YouTube.
SC-F2100 Series User's Guide Introduction E You can input and search for keywords, such as the names of items you want to confirm. For Windows Right click on a page in the PDF manual and select Find in the menu that is displayed to open the search toolbar. For macOS Select Edit in the Find menu to open the search toolbar. F To enlarge the text in the display that is too small to . Click to reduce the size. To see well, click specify a part of an illustration or screenshot to enlarge, do the following.
SC-F2100 Series User's Guide Introduction Printer Parts Front section A Airflow vents Lets out air from the printer. Do not block the airflow vents. Leave a gap of at least 15 cm when installing near a wall. B Printer cover Open when cleaning the inside of the printer. C Cartridge cover (left) Open when replacing or shaking ink cartridges. U “Shaking and Replacing Ink Cartridges” on page 83 D Platen A plate for loading T-shirts.
SC-F2100 Series User's Guide Introduction E Movable base Moves the platen to the print position and the T-shirt loading position. F Hooks Use this to hang the frame removed from the platen. U “Loading on a Platen without a Grip Pad” on page 47 G Platen installation plate A plate that supports the platen. Insert the platen here. H Platen gap adjustment lever Adjusts the distance between the platen and the print head (platen gap). The height can be selected from 17 levels.
SC-F2100 Series User's Guide Introduction Interior A Scale Guides the print head when it is operating. Except when performing maintenance, do not touch this as it could be damaged or soiled which may cause a malfunction. U “Cleaning the scale and replacing the filter” on page 69 B Carriage shaft A shaft that supports the carriage. Do not touch this during maintenance; otherwise, a malfunction could occur. C Flushing pad The ink is ejected to here during flushing.
SC-F2100 Series User's Guide Introduction F Anti-drying caps Caps that close the print head nozzles to prevent them from drying while not printing. Replace it if a message is displayed. U “Replacing the Head Cleaning Set” on page 88 G Suction cap Sucks out the ink during head cleaning to unclog the nozzles. H Wiper unit Wipes the ink adhered to the print head nozzles. The wiper unit is a consumable product. Replace it if a message is displayed.
SC-F2100 Series User's Guide Introduction Rear section A AC inlet Connect the supplied power cable here. B Waste ink outlet An outlet for the waste ink tube. Waste ink is ejected from here. They are on both the left and right sides. C Tube clamp A clamp that fixes the waste ink tube to the printer. Use the remaining clamps to secure the cables if necessary. U Setup Guide (booklet) for details on attaching and removing the clamp. D Waste ink bottle holder A holder to fix the waste ink bottle.
SC-F2100 Series User's Guide Introduction G LAN port Connect the LAN cable here. H Data light Indicates the network connection status and data reception by lighting or flashing. On : Connected. Flashing : Receiving data. I Status light Indicates the network transmission speed by the color of the light. Green : 10Base-T Red : 100Base-T J USB port Connect the USB cable here. K Air inlet Lets in the air to cool down the printer. Do not block the air inlet.
SC-F2100 Series User's Guide Introduction Control panel A Plight (Power light) Indicates the printer's operational status by lighting or flashing. On : The power is on. Flashing : The printer is operating such as receiving data, shutting down, or moving the movable base. Off : The power is off. B P button (Power button) Turns the power on and off. C + button (Cancel button) If you press this button after a job has been sent, the Cancel Job confirmation screen is displayed.
SC-F2100 Series User's Guide Introduction F l button If you press this button while the menu is displayed, you move back a step in the following order: setting value -> setting item -> menu. U “Menu Operations” on page 95 G u/d buttons (Up/Down buttons) When menus are displayed, these buttons can be used to select a setting item or a setting value. U “Menu Operations” on page 95 H Z button If you press this button while a setting value is selected in the menu, the value is set or executed.
SC-F2100 Series User's Guide Introduction Displays the platen size of the current print job. Icons are displayed as shown below depending on the platen size. Screen View : L, M, S, and XS size platens : Sleeve platen : Medium grooved platen G Waste ink bottle status A Message Displays the printer's status, operation, and error messages. Icons are displayed as shown below to indicate the waste ink bottle status and approximate remaining capacity.
SC-F2100 Series User's Guide Introduction Normal J Number of print outs/T-shirt types displayed The number of T-shirts to be printed specified dur‐ ing job sending or USB File List is displayed on the right, and the number of print outs is displayed on the left. Warning or Error 1 2 The icons shown below are displayed according to the T-shirt type set for the job being printed.
SC-F2100 Series User's Guide Introduction Features High Resolution The main features of this printer are described below. Achieving smooth gradations and high color reproducibility Smooth gradations and high color reproducibility have been achieved by using ink optimized for pigment ink textile printing to produce clear color density and Epson's image processing technology.
SC-F2100 Series User's Guide Introduction Repeat and direct printing functions Notes on Usage and Storage You can connect a commercially available USB memory stick directly to the printer. This allows you to save print-ready data (spooled) to a USB memory stick and print the jobs again. It also allows you to print when you cannot connect a computer to the printer.
SC-F2100 Series User's Guide Introduction ❏ Do not bend or tug the waste ink tube. Ink could spill inside or around the printer. U “Notes on Handling White Ink” on page 21 ❏ If the printer is not used for a long time (with the power off), perform the prolonged storage operation using the separately sold Cleaning cartridge. If the printer is left in this condition, it may be impossible to clear clogging in the print head. See the following for details.
SC-F2100 Series User's Guide Introduction ❏ When installing ink cartridges for the first time, a lot of ink is consumed to fill all parts of print head nozzles to get the printer ready for printing. Be sure to have replacement cartridges ready soon. ❏ Removed ink cartridges may have ink around the ink supply port, so be careful not to soil the surrounding area. ❏ To maintain the quality of the print head, this printer stops printing before ink cartridges are completely expended.
SC-F2100 Series User's Guide Introduction ❏ If pre-treatment liquid is applied to a white or light-colored T-shirt, the application side may turn yellow. Print soon after applying the pre-treatment liquid and wash in water. Avoid direct sunlight if you store the T-shirt without printing. Note: While in White ink mode, White ink is still consumed during maintenance even when printing with color ink only.
SC-F2100 Series User's Guide Introduction Introducing the Supplied Software Contents of the Software Disc The following applications are available for Windows on the supplied software disc. When using a computer running on macOS or one without a disc drive, you can install the software from http://epson.sn. Install as required. More information can be found in the Network Guide (Online Manual) and the software's online help. Note: The printer driver is not stored on the supplied software disc.
SC-F2100 Series User's Guide Introduction Starting Epson Control Dashboard for DTG You can access Epson Control Dashboard for DTG from a computer on the same network as the computer on which it is installed. Epson Control Dashboard for DTG is a Web application that resides on your computer. When you start up the computer, Epson Control Dashboard for DTG starts automatically and is permanently running. You do not need to install Epson Control Dashboard for DTG on the startup computer.
SC-F2100 Series User's Guide Introduction Using EPSON Software Updater B Click Auto update settings. Checking software update availability C Select an interval for checking for updates on the printer's Interval to Check box, and then click OK. the following status. A❏ Check The computer is connected to the Internet. Removing the Software ❏ The printer and the computer can communicate.
SC-F2100 Series User's Guide Introduction D Follow the on-screen instructions to continue. When the removal confirmation message appears, click Yes. If you are reinstalling the Epson communications drivers, restart the computer. macOS This section explains how to remove Epson Control Dashboard for DTG. A Double-click Applications - Epson Software Epson Control Dashboard2 - Epson Control Dashboard for DTG Uninstaller. Follow the on-screen instructions to remove the software, and then go to step 2.
SC-F2100 Series User's Guide Basic Printing T-shirts (commercially available) Basic Printing We recommend using a 100% cotton, thick fabric with a high weave density. You can load media with a cotton blend ratio of 100% to 50%. However, we recommend making a test print in advance since the print quality cannot always be guaranteed for some types of fabric. Preparation To print on a T-shirt using this printer, you need the following devices and parts.
SC-F2100 Series User's Guide Basic Printing Pre-treatment liquid (consumable) Apply the diluted pre-treatment liquid to the T-shirt with a roller or spray bottle before printing. Pure water (commercially available) Dilutes the pre-treatment liquid. Pre-treatment liquid roller (option or commercially available) This is used to apply pre-treatment liquid to the T-shirts.
SC-F2100 Series User's Guide Basic Printing Overview This section explains the basic workflow from preparing a T-shirt before printing to post-treatment after printing. The following shows the procedure for sending a job from the Garment Creator supplied to the printer and then printing on a T-shirt. The printer also allows you to print by connecting a USB memory containing a saved job.
SC-F2100 Series User's Guide Basic Printing Removing the T-shirt (media) Remove the T-shirt from the printer. Post-treatment Fixate the ink to the T-shirt.
SC-F2100 Series User's Guide Basic Printing Before Printing Pre-treatment (only for White ink) To maintain good print quality, perform the following inspection before starting printing operations each day. When printing with White ink, you need to apply pre-treatment liquid to the T-shirt. Applying pre-treatment liquid allows the White ink to develop creating a more vivid color.
SC-F2100 Series User's Guide Basic Printing Opening the pre-treatment liquid Caution: ❏ Always wear protective eyewear, gloves, and a mask when working. Should any pre-treatment liquid contact your skin or enter your eyes or mouth, immediately take the following actions: A Cut the cardboard along the perforations, and then remove the tap from inside. B Pull the cap section out of the hole in the cardboard. ❏ If fluid adheres to your skin, immediately wash it off using large volumes of soapy water.
SC-F2100 Series User's Guide Basic Printing D D Remove the tap from the bag and check that the hole is visible. Make sure you keep the mouth of the tap facing up as shown in the illustration. If you cannot see the hole, turn the tap's handle section until the hole is visible. Note: If you cannot see the hole or if the tap is damaged, contact the store where you purchased the product. E Attach the tap.
SC-F2100 Series User's Guide Basic Printing Amount of pre-treatment liquid to apply Note: You need to press the fibers flat to produce even whiteness. Use a heat press to fixate the pre-treatment liquid since the fibers are not pressed flat in the oven. Apply the diluted pre-treatment liquid to the T-shirt with a roller or sprayer. Apply approximately 15 g of pre-treatment liquid to printing areas of A4 size.
SC-F2100 Series User's Guide Basic Printing c Important: Note: You need to press the fibers flat to produce even whiteness. Use a heat press to fixate the pre-treatment liquid since the fibers are not pressed flat in the oven. ❏ Make sure you dry the pre-treatment liquid thoroughly. Insufficient drying time may cause the print quality to decline. ❏ Do not wet the T-shirt or leave it in a humid location for a long time after fixating the pre-treatment liquid.
SC-F2100 Series User's Guide Basic Printing Repeat printing Creating and Sending Jobs If you send a job from Garment Creator using the USB memory stick connected to the printer, it is automatically saved to the USB memory with the filename Epson_repeat_print.prn. When an Epson_repeat_print.prn file is saved to a USB memory to start stick, the message Place shirt and press printing. is displayed repeatedly until you press the + button and select Job Cancel and you can repeat printing for the same job.
SC-F2100 Series User's Guide Basic Printing Depending on the thickness of the fabric being printed on, you also need to attach/remove the spacers in advance to adjust the platen height to the appropriate position. Preparing the Platen The following explains preparations for three points.
SC-F2100 Series User's Guide Basic Printing C Gently hold the section that was peeled off the pad, and then stick the grip pad. D Peel off all of the other sections on the back of the grip pad as shown in the illustration. E Stick it from the end that is already stuck, as shown in the illustration. G Fold over the long edges of the grip pad and stick them to the back of the platen without allowing the pad to loosen or sag. H Fold over and stick all of the corners of the grip pad.
SC-F2100 Series User's Guide Basic Printing A Place the platen on a flat surface with the back side facing up. B Peel off the pad that has been folded over the edges. D Note: Pads that have been stuck to the platen for a long time may be hard to peel off. In this case, use a commercially available spatula for peeling off labels. C Peel off the grip pad from back to front.
SC-F2100 Series User's Guide Basic Printing B Remove the screw. Replacing Platens and Removing/Attaching Spacers Prepare a cross-head screwdriver before removing the spacers. Buttons that are used in the following operations C Remove the parts. Slide in the direction shown in (1), and then remove it. You need the removed screw and parts when loading polo shirts and so on. Store them in a safe place. We recommend keeping the screw attached to the platen. A Check that the platen is ejected forward.
SC-F2100 Series User's Guide Basic Printing The thickness shown in the following table is the total thickness of the fabric placed on the platen. For fabric with a thickness of 9.0 to 17.0 mm Attach spacer b only. For fabric with a thickness of 15.0 to 24.0 mm Remove spacers a and b. See the following for details on the thickness of the fabric.
SC-F2100 Series User's Guide Basic Printing If you do need to change the number of spacers, go to step 5. E F Loosen the fixing lever. H Remove the platen gap adjustment lever. I Change the status of the spacer in step 4 according to the installed platen and the thickness of the fabric to be printed on. Use the cross-head screwdriver to remove the screws securing the platen installation plate. Make sure you keep the removed screws in a safe place as you need them when attaching spacers a and b.
SC-F2100 Series User's Guide Basic Printing There is no particular stacking order when installing both spacers. J L Tighten the fixing lever to secure the platen gap adjustment lever. M Make sure the axes of the replacement platen fit into the holes. Install the platen gap adjustment lever in the direction shown below. Installing L, M, S, or XS size platens It does not matter in which orientation the platen is installed. K Return the platen installation plate.
SC-F2100 Series User's Guide Basic Printing Installing the sleeve platen (1) Install the platen in the orientation shown in the illustration. After replacing the platen with a different size, we recommend you correct print misalignment (Head Alignment). (2) Align the fixing band with the groove on the top of the platen and wind it tightly. U “Head Alignment” on page 82 Note the following two points when winding. ❏ Pass the fixing band under the platen installation plate.
SC-F2100 Series User's Guide Basic Printing Load the T-shirt (media) C Load the T-shirt so that the shoulders are at the front. D Pull the parts of the shirt that extend beyond the platen to flatten the print surface. If you notice any creases on the T-shirt, use the heat press to iron them out before you start printing. When loading a T-shirt on a grip pad covered platen, do not use the frame supplied. If you use a frame with a grip pad covered platen, you cannot secure the T-shirt correctly.
SC-F2100 Series User's Guide Basic Printing E Remove any lint from the printing surface, and press the fibers flat. Press the T-shirt lightly with the grip pad tool and move it vertically and horizontally from the edges as shown in the following illustration. Repeat this step 2 to 3 times to remove any slack or creases and make the printing surface flat. There may be lint on the T-shirt if you have not applied pre-treatment liquid.
SC-F2100 Series User's Guide Basic Printing c Important: Buttons that are used in the following operations The printer detects the highest part of the print surface and adjusts the height. If there are any creases or slack remaining as shown in the illustration below, the distance between the print head and the print surface may increase and print quality may decline. Flatten the T-shirt so that there are no creases or sagging. A Press the P button to turn on the printer.
SC-F2100 Series User's Guide Basic Printing E G Pull the parts of the shirt that extend beyond the platen to flatten the print surface. Remove any lint from the printing surface, and press the fibers flat. There may be lint on the T-shirt if you have not applied pre-treatment liquid. Remove the lint using the sticky tape or roller and press the fibers flat using the hard roller. Lint and fibers may stick to the print head and stain other areas. c Important: Do not pull too hard on the T-shirt.
SC-F2100 Series User's Guide Basic Printing Using the supplied hook c Important: Attaching the hook supplied with the printer as shown in the illustration allows you to hang the frame removed from the platen. The printer detects the highest part of the print surface and adjusts the height. If there are any creases or slack near the inside edge of the frame as shown in the diagram below, the distance between the print head and the print surface may increase and print quality may decline.
SC-F2100 Series User's Guide Basic Printing ❏ Frames for XS size platens as well as sleeve platens C Remove the frame from the platen. D Pass the platen through the T-shirt sleeve. E Pull the parts of the shirt that extend beyond the platen to flatten the print surface. When using the hook, install the printer so that the hook is closer to you than the front edge of the stand. Loading on Sleeve Platens Buttons that are used in the following operations A Press the P button to turn on the printer.
SC-F2100 Series User's Guide Basic Printing c Important: c Important: ❏ Load the T-shirt so that the side seams and sleeve seams are not on the top. If there are raised sections such as seams, a Platen Height Error may occur, or the print quality may decline. Stretch the T-shirt so that there are no creases or slack. However, if the T-shirts is stretched too much, the print quality may decline due to deformation of the image, and the white under-base print may extend outside the image.
SC-F2100 Series User's Guide Basic Printing C Remove the frame from the platen. D Load the media so that the shoulders are at the front. E Pull the parts of the shirt that extend beyond the platen to flatten the print surface. c Important: When the square part is attached (for shirts such as polo shirts) Do not pull too hard on the media. If the media is stretched too much, the print quality may decline due to deformed images and so on, and the white under-base print may extend outside the image.
SC-F2100 Series User's Guide Basic Printing G Remove any lint from the printing surface, and press the fibers flat. I Press down the frame of the platen so that it does not become loose. There may be lint on the media if you have not applied pre-treatment liquid. Remove the lint using the sticky tape or roller and press the fibers flat using the hard roller. Lint and fibers may stick to the print head and stain other areas.
SC-F2100 Series User's Guide Basic Printing C Set the platen gap to a suitable value The position at which the width of the platen gap returns from the second scale to the scale with larger values at which the error is displayed is a suitable value. Move the platen gap adjustment lever to match the scale to the adjustment start position. When printing on T-shirts using L, M, S, or XS size platens (also with spacers a and b installed) ❏ When a grip pad covered platen is installed: Adjust to 4.
SC-F2100 Series User's Guide Basic Printing F If you have worked up to step 6 and then return to step 1 to re-adjust the platen gap, move the platen gap adjustment lever by one scale to the smaller values. When the error is displayed Go to step 7. When the error is not displayed Note: If you remove both spacers, you cannot check the scale. In this situation, the position you move the platen gap adjustment lever to at the far right is position 8. Repeat the following steps until the error is displayed.
SC-F2100 Series User's Guide Basic Printing Starting repeat printing Starting and Canceling Printing If you send a job to a printer after connecting a USB memory stick, you can keep printing the same job even after printing the specified number of copies. When to start printing.is displayed Place shirt and press on the screen, load the T-shirt and then press the x button. Starting A When receiving the job is complete, the message Place shirt and press to start printing. is displayed on the screen.
SC-F2100 Series User's Guide Basic Printing Fixating the Ink After printing, the T-shirt is processed in a heat press or oven to fixate the ink. *1 The optimum conditions vary depending on the type of heat press such as the manual adjustment type. Be sure to test the ink fixation result in advance to find the right pressure. *2 Images larger than A4 that have White ink may take longer than 45 seconds to dry. Try extending the time up to 90 seconds while checking if the ink is dry.
SC-F2100 Series User's Guide Basic Printing ❏ Number of data items: Up to 256 (prn files only) Save the data in the root folder on the USB memory. If the data is saved in a sub-folder, it is not displayed even if the USB memory stick is connected to the printer. Furthermore, even for files saved in the root folder, only files with the extension "prn" are displayed. Printing from a USB Memory You can run the following features when a USB memory device is connected to the printer.
SC-F2100 Series User's Guide Basic Printing D Confirm that Select Print File is highlighted, and then press the r button. E Press the u/d buttons to highlight the jobs you want to print, and then press the r button. F Press the u/d buttons to set the number of copies, and then press the Z button. B A preview of the jobs is displayed on the screen.
SC-F2100 Series User's Guide Maintenance Maintenance When to Perform Various Maintenance Operations To maintain the print quality of the printer, you need to perform cleaning and replace consumables. If maintenance is not performed, print quality may decline, the printer's service life may be reduced, or you may be liable for the cost of any repairs. Always perform maintenance when a message is displayed on the screen.
SC-F2100 Series User's Guide Maintenance When to perform Component to be cleaned The printing surface and so on is soiled even when cleaning the caps D Clean around print head U “Cleaning around head” on page 71 You can check the procedure in a video on YouTube. Epson Video Manuals When printing is not performed normally even after head cleaning E Clean edges of the metal U “Clean Border of the Metal” on page 73 * If this message is displayed frequently, contact your dealer or Epson support.
SC-F2100 Series User's Guide Maintenance When to perform Component to be replaced See manual to clean scale and change air filter. is displayed DAir filter* U “Cleaning the scale and replacing the filter” on page 69 You can check the procedure in a video on YouTube. Epson Video Manuals Ink Low is displayed, as soon as you can E Ink cartridge U “Shaking and Replacing Ink Cartridges” on page 83 * Replace the air filter when cleaning the scale.
SC-F2100 Series User's Guide Maintenance Air filter (consumable) Preparation When cleaning the scale, use the cleaning cloth supplied with the air filter. Ready the following items before beginning cleaning and replacement. Soft cloth When the supplied parts have been completely used, purchase new consumables. This is used to clean the edges of the metal and to clean platens without grip pad. Prepare genuine parts when replacing ink cartridges or performing maintenance.
SC-F2100 Series User's Guide Maintenance ❏ Touch a metal object before starting operations to disperse any static electricity. Cautions when operating Caution: ❏ Always wear protective eyewear, gloves, and a mask when working. Should any waste ink or ink cleaner come into contact with your skin or enter your eyes or mouth, immediately take the following actions. ❏ If fluid adheres to your skin, immediately wash it off using large volumes of soapy water.
SC-F2100 Series User's Guide Maintenance Using ink cleaner B Pour an appropriate amount of ink cleaner into the cup supplied with the maintenance kit. C Let the ink cleaner soak into the cleaning stick or cleaning cloth. The ink cleaner is used to clean the following parts. Do not use it on any other parts as this could damage the parts. Parts you can clean ❏ When cleaning the suction cap Dampen a cleaning stick with ink cleaner to use it.
SC-F2100 Series User's Guide Maintenance Disposal of used consumables Cleaning the Suction Cap Before starting this procedure, be sure to read the following: Disposal U “Cautions when operating” on page 64 The following used parts with adhered ink or pre-treatment liquid are classified as industrial waste. When it is time to clean the suction cap, the message Do following: Head Cap Cleaning is displayed.
SC-F2100 Series User's Guide Maintenance Note: After 10 minutes from the start of cleaning the suction caps, a screen is displayed and a buzzer sounds informing you that 10 minutes have elapsed. Press the Z button to continue the cleaning process. After 10 more minutes have passed, the buzzer sounds again. If the print head is moved out of its designated position for more than 10 minutes, the nozzles could easily be clogged. Finish cleaning as soon as possible.
SC-F2100 Series User's Guide Maintenance H Wipe the outside of the suction cap with a wide cleaning stick. I When wiping the outside of the suction cap, remember to also wipe the top edge. After removing ink from the cap as shown below, go to the next step. J Close the printer cover, and then press the Z button. When the print head returns to its normal position, the Settings menu closes. After you finish cleaning, we recommend checking for clogged nozzles.
SC-F2100 Series User's Guide Maintenance D Cleaning the scale and replacing the filter Use the cleaning cloth soaked in ink cleaner to wipe away ink that has stuck to the scale. c Important: Do not touch the carriage shaft inside the printer. It may cause an operational error or a malfunction. When cleaning the scale and replacing the air filter, the message See manual to clean scale and change air filter. is displayed on the control panel. Clean the scale and then replace the air filter.
SC-F2100 Series User's Guide Maintenance F Grip the tab on the air filter and remove it. G Put the old air filter into the bag of the new air filter. H Attach the new air filter. I Close the printer cover. c Important: ❏ Do not pull the scale with excessive force. If it is pulled with too much force, the right section may detach. ❏ Make sure that ink cleaner does not drip into the printer. If any cleaner does drip, wipe it with a dry cleaning cloth.
SC-F2100 Series User's Guide Maintenance Cleaning around head Disposing of Used Consumables U “Disposal” on page 66 If the printing surface and so on is dirty even after performing suction cap cleaning, fibers, such as lint, may have accumulated around the print head nozzles. Follow the steps below to clean around the print heads. c Important: Do not move the print head or the platen manually. A malfunction may occur.
SC-F2100 Series User's Guide Maintenance E Open the printer cover. F After the print head has moved to the maintenance position, place a metal or plastic tray, or paper under the print head. (1) Wipe the edges at the front and rear of the nozzle surface. This prevents ink from dripping and soiling the printer. (2) Wipe the parts on the left and right of the nozzle surface.
SC-F2100 Series User's Guide Maintenance D Clean Border of the Metal If printing is not performed normally even after performing head cleaning, fibers, such as lint, may be stuck to the border of the metal on the path for the print head. Follow the steps below to clean the border of the metal. c Important: Do not apply force to the gears shown below when cleaning. A malfunction may occur. Warning: Stop using the printer if any foreign objects or liquids, such as water, enter the printer.
SC-F2100 Series User's Guide Maintenance E Wipe the border of the metal on the right of the flushing pad. Replacing White Ink When using the printer in White ink mode or color ink mode, you can switch the color mode as shown in the following table. You cannot switch color mode when printing in high-speed color mode. Changing to Mode Current Mode White White Color ✓ High-spee d color – Color High-spee d color ✓ – – – F Wipe off areas that were wiped with a wet cloth using a dry, soft cloth.
SC-F2100 Series User's Guide Maintenance Buttons that are used in the following operations A F Remove the protective cover, and then press the Z button. G Install the charging unit, and then press the Z button. Confirm that the printer is on, and then press the - button. The Maintenance menu is displayed. B Press the d/u buttons to highlight Replace White Ink, and then press the r button. C Press the d/u buttons to highlight Yes, and then press the Z button.
SC-F2100 Series User's Guide Maintenance J Remove the charging unit, and then press the Z button. Note: If you use the printer in color ink mode for an extended period and then switch to White ink mode, the density of the White ink may be too weak. If the density is too weak, try running head cleaning for the nozzles for White ink using the Execute (Heavy) level. If this still does not improve the results, contact the Epson Support. While holding down the lever shown in (1), lift the unit straight up.
SC-F2100 Series User's Guide Maintenance Prolonged Storage If the printer is not used for a long time (with the power off), make sure you change the ink cartridge to a Cleaning cartridge from the Maintenance menu before storing. If the printer is left in this condition, it may be impossible to clear clogging in the print head. As shown below, the period for which the prolonged storage operation is necessary varies depending on the mode being used.
SC-F2100 Series User's Guide Maintenance Checking for clogged nozzles Loading media Buttons that are used in the following operations Print a nozzle check pattern to check if the nozzles are clogged. You need the following media to print the nozzle check pattern. The type of media to be used varies depending on the color mode setting. Also, when adjusting spacers to print on thick media, you need to install spacers. See the following for detailed instructions.
SC-F2100 Series User's Guide Maintenance • When L, M, S, and XS size platens are installed • When printing a nozzle check pattern from the printer with the medium grooved platen E Secure the media with cellophane tape and so on to keep it in place. F Set the platen gap adjustment lever to the following position on the scale. Place in the center of the platen.
SC-F2100 Series User's Guide Maintenance For the procedure for printing the nozzle check pattern from Garment Creator, see the Garment Creator's online help. Cleaning the print head If the printed result is faint or has gaps, cleaning the print head may clear the clogged nozzles. Buttons that are used in the following operations Head cleaning levels You can select from three levels of head cleaning. Use light or medium for normal cleaning.
SC-F2100 Series User's Guide Maintenance Nozzles are still clogged after performing head cleaning several times Buttons that are used in the following operations The edge of the metal may be soiled. Perform the following. U “Clean Border of the Metal” on page 73 A Press the - button. B Press the u/d buttons to highlight Head Cleaning, and then press the r button. C Press the u/d buttons to highlight the method for cleaning the nozzle row, and then press the r button.
SC-F2100 Series User's Guide Maintenance Correcting the print misalignment Note: The check pattern is printed at the same size as the top surface of the platen installation plate. B Press the r button to display the Settings menu. C Press the u/d buttons to highlight Printer Setup, and then press the r button. D Press the u/d buttons to select Head Alignment, and then press the r button. The following two options are available for correcting print misalignments.
SC-F2100 Series User's Guide Maintenance H Look at the printed check pattern, and check the pattern number with the least lines. Shaking and Replacing Ink Cartridges For example, in the following illustration "5" is the best pattern. Shaking Timing and frequency of shaking c Important: Due to ink characteristics, the ink cartridges of this printer are prone to sedimentation (components settling to the bottom of the liquid). If ink settles, tint unevenness and nozzle clogs occur.
SC-F2100 Series User's Guide Maintenance The following procedure explains how to replace ink cartridges and the Cleaning cartridge. Shaking method A Make sure the printer is on, and then remove the ink cartridge. c Important: When replacing a cartridge, remove the new one from the bag. B Epson recommends the use of genuine Epson ink cartridges. Epson cannot guarantee the quality or reliability of non-genuine ink.
SC-F2100 Series User's Guide Maintenance F c Important: Do not touch the IC chip on the top of the ink cartridge. The cartridge may not be recognized, or the printer may become unable to print properly. D Close the cartridge cover. Hold the cartridge horizontally and shake it in both directions about 5 cm 15 times in 5 seconds. Shake White ink well on both sides approx. 50 times in 15 seconds.
SC-F2100 Series User's Guide Maintenance Disposing of Waste Ink If you need to replace the waste ink bottle before the message is displayed, select Waste Ink Counter from the maintenance menu. Preparing and Replacement Timing Maintenance menu U “Maintenance” on page 98 c Important: Prepare empty waste ink bottle. is displayed Always clear the waste ink counter if you replace the Waste Ink Bottle before being prompted to do so by a message.
SC-F2100 Series User's Guide Maintenance B Remove the waste ink tube from the used waste ink bottle, and insert it into the new waste ink bottle taking care not to spill any waste ink. C Place the caps onto the used waste ink bottle. E Press the Z button. F Check again to confirm that a new Waste Ink Bottle is correctly inserted. Press the Z button to clear the waste ink counter. Dispose of the waste ink with the waste ink bottle. Do not pour it into another container.
SC-F2100 Series User's Guide Maintenance Replacing the Head Cleaning Set Always choose a replacement head cleaning set that is specified for this printer. U “Options and Consumable Products” on page 114 Preparing and Replacement Timing Before starting this procedure, be sure to read the following: When Head cleaning set is nearing end of life. is displayed U “Cautions when operating” on page 64 Prepare a new head cleaning set as soon as possible.
SC-F2100 Series User's Guide Maintenance C D E Place your fingers in the groove on the back of the wiper unit, and tilt it forward a little. Grip the sides, and pull it straight up to lift it out. F Insert the new wiper unit. G Unpack the new anti-drying cap, and then remove the cover. H Press the lever towards you, and then lift the anti-drying cap to remove it. I Attach the cover removed in step 7 to the old anti-drying cap, and then put it into the bag of the new anti-drying cap.
SC-F2100 Series User's Guide Maintenance J Press the lever forwards, and then place the holes in the anti-drying cap over the two poles on the printer. K Close the printer cover, and then press the Z button. L Press the u/d buttons to highlight Yes, and then press the Z button. Hold it at an angle and wait until the waste ink stops dripping from the flushing pad. Remove and place it on the metal tray. Press the Z button to move the print head to the flushing pad replacement position.
SC-F2100 Series User's Guide Maintenance O Place the removed flushing pad in the packaging that contained the new flushing pad. Tube Washing Because sedimentation occurs easily in White ink, the whiteness may decline or result in uneven white printing if you continue printing in white. You therefore need to clean the tubes to improve print quality. Tube washing can also help to clear clogged nozzles.
SC-F2100 Series User's Guide Maintenance Setting (color) Color Ink A New cartridge ❏ Cyan ink x1 ❏ Magenta ink x1 ❏ Yellow ink x1 ❏ Black ink x1 ❏ Cleaning liquid x4 The Maintenance menu is displayed. Color ink mode Setting (color) Color Ink New cartridge ❏ Cyan ink x1 ❏ Magenta ink x1 ❏ Yellow ink x1 ❏ Black ink x1 ❏ Cleaning liquid x4 Confirm that the printer is on, and then press the - button. B Press the d/u buttons to highlight Tube Washing, and then press the r button.
SC-F2100 Series User's Guide Maintenance G L Prepare a Cleaning cartridge. c Important: Do not touch the IC chip on the top of the cartridge. The cartridge may not be recognized, or the printer may become unable to print properly. H Holding the cartridge with the label side facing out, slide it all the way into the slot. I Close the cartridge cover. J Press the Z button. K Press the Z button to start charging the cleaning liquid. When Open cartridge cover(s).
SC-F2100 Series User's Guide Maintenance Clean the Platen without Grip Pad A Check that the platen is ejected forward. If it is not ejected, press the } button to move the platen forward. B Turn off the printer and check that the displayed screen disappears. C Use a soft, clean cloth to carefully remove any dust or dirt. If there is a serious dirt problem, clean it using a soft, clean cloth dampened with water and a small amount of detergent and wrung tight.
SC-F2100 Series User's Guide Using the Control Panel Menu Using the Control Panel Menu Menu Operations The steps for displaying the various menus are shown below. * The operation performed when you press the Z button depends on the selected item.
SC-F2100 Series User's Guide Using the Control Panel Menu Menu List The items and options available in the menu are described below. See the reference pages for more details on each item. Maintenance For more information on these items, see U “Maintenance” on page 98.
SC-F2100 Series User's Guide Using the Control Panel Menu USB File List For more information on these items, see U “USB File List” on page 100. Setting Item Setting Select Print File xxxxxxxxxxxxxxxxxxxxxx Delete Print File x to xxx pages Yes, No Printer Status For more information on these items, see U “Printer Status” on page 100. Setting Item Display Value Total Prints xxxxxx pages Firmware Version xxxxxxx,x.
SC-F2100 Series User's Guide Using the Control Panel Menu Menu Descriptions Maintenance * Default Settings Setting Item Setting Nozzle Check Description Press the Z button to print a nozzle check pattern. Visually inspect the printed pattern and perform head cleaning if you notice faint or missing areas. U “Checking for clogged nozzles” on page 78 Head Cleaning Selected Nozzles XX/XX ("XX" indicates an ink color code.
SC-F2100 Series User's Guide Using the Control Panel Menu Setting Item Setting Description Cleaning around head Yes Select Yes to move the platen and print head to the maintenance position. Make sure you select Yes from the menu and then perform cleaning. Problems can occur if you move the print head manually.
SC-F2100 Series User's Guide Using the Control Panel Menu Setting Item Setting Head Alignment Description If print results are grainy or blurry, perform Head Alignment to realign the print head for each platen size. Visually inspect the printed check pattern, and then enter the adjustment value for the pattern with the least visible lines. If there is no optimum adjustment value in the printed check pattern, perform this setting again after entering "1" or "13".
SC-F2100 Series User's Guide Using the Control Panel Menu Administrator Menu * Default Settings Setting Item Setting Description Auto* Select whether to use DHCP to set the IP address (Auto), or to set the address manually (Panel). When you select Panel, set the IP Address, Subnet Mask, and Default Gateway. Contact your system administrator for these values. Network Setup IP Address Setting Panel Restore Settings Yes Reverts all setting values for Network Setup to their default values.
SC-F2100 Series User's Guide Using the Control Panel Menu Setting Item Power On Cleaning Setting Description On* This is only available in White ink mode. Off On: Cleaning is performed when the initial operation is complete after the power is turned on and before starting printing for the first time, and then cleaning is also done periodically after that.
SC-F2100 Series User's Guide Using the Control Panel Menu Setting Item Setting Description Reset All Settings Yes Select Yes to revert all setting values to their default values expect for the following. No* ❏ Date & Time ❏ Language ❏ Maintenance Mode Even if you perform a reset, the mode currently being used (White ink mode, Color ink mode, High-speed color mode) is not changed.
SC-F2100 Series User's Guide Problem Solver Problem Solver What to Do When a Message Is Displayed If the printer displays one of the messages shown below, refer to the solution listed and take the necessary steps. Message What to do Ink Cartridge Error Ink cartridge cannot be recognized. Insert again or replace ink cartridge. ❏ Check that the cartridge is the same color as the color displayed on the control panel, and then reinstall the cartridge.
SC-F2100 Series User's Guide Problem Solver Message What to do USB Memory Error Failed to write to USB memory. The USB memory may be in one of the following conditions. ❏ The USB memory is damaged ❏ The USB memory was removed while data was being written ❏ There is not enough free space or the number of saved files has reached the maximum limit U “USB memory requirements” on page 58 Check that the USB memory is not damaged and that there is enough free space.
SC-F2100 Series User's Guide Problem Solver Message What to do Call For Service XXXX Error XXXX Power off and then on. If this doesn't work, note the code and call for service. A call for service occurs when: ❏ The power cable is not connected securely ❏ An error that cannot be cleared occurs When a call for service has occurred, the printer automatically stops printing. Turn off the printer, disconnect the power cable both from the outlet and from the printer, and then reconnect.
SC-F2100 Series User's Guide Problem Solver Troubleshooting o Is the USB hub recognized correctly? Check if the USB hub is recognized correctly on the computer. If the computer correctly recognizes the USB hub, disconnect all USB hubs from the computer and connect the printer directly to the computer's USB port. Contact the USB hub manufacturer to find out more about USB hub operations. You cannot print (because the printer does not work) The printer does not turn on.
SC-F2100 Series User's Guide Problem Solver o Check the printer operations. o Print a nozzle check pattern. Because a nozzle check pattern can be printed without connecting to a computer, you can check the operations and print status for the printer. If fibers are stuck to the border of the metal, the fibers come into contact with the print head when it moves which may prevent ink from firing. Clean the border of the metal if performing head cleaning does not clear the problem.
SC-F2100 Series User's Guide Problem Solver o Perform Feed Adjustment. o The problem may improve by adjusting the platen feed for each time the print head moves. Is Ink Low displayed on the control panel? The print quality may decline when the ink is low. We recommend replacing the ink cartridge with a new one. If there is a difference in color after replacing the ink cartridge, try performing head cleaning a few times.
SC-F2100 Series User's Guide Problem Solver o Not enough or uneven whiteness Clean the nozzle row for the White ink. After storing for an extended period or after switching to White ink, the density of White ink may become weaker. Try running head cleaning for the nozzle row for White ink using the Execute (Heavy) level. If this still does not improve the results, contact the Epson Support. o If the nozzles are clogged, nozzles do not fire ink and the print quality declines.
SC-F2100 Series User's Guide Problem Solver o Have you optimized the temperature and pressure of the heat press? Others The temperature of the heat press decreases when you press a T-shirt that has had pre-treatment liquid applied. When pressing several T-shirts one after another, check that the temperature of the heat press is not lower than required. Also, the whiteness becomes uneven if the pressure is insufficient since the T-shirt does not dry completely and the fibers are not pressed flat.
SC-F2100 Series User's Guide Problem Solver Platen Height Error is displayed while printing Areas not printed are stained with ink o o Is the platen clean? Are you printing a job over the entire print area that requires a large amount of ink? The platen's frame and the top plate may be stained. Check the platen and clean it if necessary.
SC-F2100 Series User's Guide Problem Solver o Are you using a USB memory stick with a slow reading speed? If you use a USB memory stick with a slow reading speed (4.63 MB/sec or less) when printing from a USB memory stick, the print head stops at times during printing and printing continues. Use a USB memory stick with a fast reading speed.
SC-F2100 Series User's Guide Appendix Appendix Options and Consumable Products The following options and consumable products are available for use with your printer. (As of December, 2017) For the latest information, see the Epson Web site.
SC-F2100 Series User's Guide Appendix U “Shaking and Replacing Ink Cartridges” on page 83 Others Product name Product number Explanation Cleaning cartridge T7360 For washing the print head and washing the tubes. Pre-treatment Liquid T7361 20 liters. Dilute before use. U “Using Pre-treatment Liquid” on page 31 Maintenance Kit T7362 The same as the maintenance kit supplied with the printer.
SC-F2100 Series User's Guide Appendix Product name Product number Explanation Medium Grooved Platen (except for SC-F2180) C12C933961 This platen allows you to print correctly on polo shirts as well as shirts with zippers and buttons.
SC-F2100 Series User's Guide Appendix Notes When Moving or Transporting the Printer Preparing to Move This section explains how to move the printer on the same floor without any changes in the floor level. See the following for instructions on moving the printer to another floor or building. This section explains how to move or transport the printer. U “Transporting the Printer” on page 118 Caution: ❏ Do not attempt to carry the printer on your own.
SC-F2100 Series User's Guide Appendix E Adjust the print head misalignments, and then check the print quality. U “Correcting the print misalignment” on page 82 Transporting the Printer When transporting the printer, protect the printer from shock and vibration using the protective materials and packing materials used when it was initially delivered after preparing the printer for the move. E U “Preparing to Move” on page 117 Insert parts removed during the setup.
SC-F2100 Series User's Guide Appendix You cannot print on certain areas inside each platen frame or certain areas from the top, bottom, left, or right of the edge of the top plate. The areas indicated by A and B in the following illustration cannot be printed. Sleeve platen You cannot print on certain areas from the raised section inside the platen frame.
SC-F2100 Series User's Guide Appendix Table Showing the Scale on the Label and the Media Thickness The following table shows the connection between the scale on the label and the approximate media thickness. When an L, M, or S size grip pad covered platen is installed Scale on label Spacers and media thickness (mm) a+b a only b only None Supports media 6.0 mm thicker than a + b Supports media 10.0 mm thicker than a + b Supports media 16.0 mm thicker than a + b 5.0 9.0 15.0 6.0 10.0 16.0 7.
SC-F2100 Series User's Guide Appendix When an L, M, or S size platen without a grip pad or an XS size platen is installed: Scale on label Spacers and media thickness (mm) a+b a only b only None Supports 6.0 mm thick media for a + b Supports 10.0 mm thick media for a + b Supports 16.0 mm thick media for a + b 6.0 10.0 16.0 7.0 11.0 17.0 2.0 8.0 12.0 18.0 3.0 9.0 13.0 19.0 4.0 10.0 14.0 20.0 5.0 11.0 15.0 21.0 6.0 12.0 16.0 22.0 7.0 13.0 17.0 23.0 8.0 14.0 18.
SC-F2100 Series User's Guide Appendix When a sleeve platen or a medium grooved platen is installed Scale on label Spacers and media thickness (mm) b only None Supports media 6.0 mm thicker than b only P • 6.0 <1.0 1 7.0 • 2 2.0 8.0 3.0 9.0 4.0 10.0 5.0 11.0 6.0 12.0 7.0 13.0 8.0 14.
SC-F2100 Series User's Guide Appendix System Requirements Each software can be used in the following environments. (As of December, 2017) The supported operating systems may change. For the latest information, see the Epson Web site. Epson Control Dashboard for DTG c Important: Make sure the computer on which the Epson Control Dashboard for DTG is installed meets the following requirements. If these requirements are not met, the software cannot monitor the printer correctly.
SC-F2100 Series User's Guide Appendix Display resolution 1024 x 768 or higher Communication interface High Speed USB Ethernet 1000Base-T Browser Safari 6 or later Garment Creator Windows Operating systems Windows 7 SP1 / Windows 7 x64 SP1 Windows 8 / Windows 8 x64 Windows 8.1 / Windows 8.1 x64 Windows 10 / Windows 10 x64 CPU Intel Core2Duo 2.
SC-F2100 Series User's Guide Appendix Specifications Table Printer Specifications Socket interval 128 mm Printer Specifications Socket diameter 19.9 mm Printing method Available heights 23.5 to 31.5 mm Thickness of height regulation spacers 7.
SC-F2100 Series User's Guide Appendix Cleaning cartridge specifications Warning: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
SC-F2100 Series User's Guide Where To Get Help Where To Get Help Contacting Epson Support Technical Support Web Site Before Contacting Epson If your Epson product is not operating properly and you cannot solve the problem using the troubleshooting information in your product documentation, contact Epson support services for assistance. If Epson support for your area is not listed below, contact the dealer where you purchased your product.
SC-F2100 Series User's Guide Where To Get Help Help for Users in North America Help for Users in Taiwan Epson provides the technical support services listed below. Contacts for information, support, and services are: World Wide Web (http:// www.epson.com.tw) Internet Support Visit Epson’s support website at http://epson.com/ support and select your product for solutions to common problems.
SC-F2100 Series User's Guide Where To Get Help Telephone number Fax number Address 03-5325077 03-5320092 1F., No.9, Ln. 379, Sec. 1, Jingguo Rd., North Dist., Hsinchu City 300, Taiwan 04-23011502 04-23011503 3F., No.30, Dahe Rd., West Dist., Taichung City 40341, Taiwan (R.O.C.) 04-23805000 04-23806000 No.530, Sec. 4, Henan Rd., Nantun Dist., Taichung City 408, Taiwan 05-2784222 05-2784555 No.463, Zhongxiao Rd., East Dist., Chiayi City 600, Taiwan 06-2221666 06-2112555 No.141, Gongyuan N.
SC-F2100 Series User's Guide Where To Get Help ❏ Sales enquiries and product information ❏ Frequently Asked Questions (FAQ), Sales Enquiries, questions through e-mail ❏ Product usage questions or problems Epson Hotline ❏ Enquiries on repair service and warranty ❏ Sales enquiries and product information Help for Users in Thailand ❏ Technical support Phone (62) 21-572 4350 Contacts for information, support, and services are: Fax (62) 21-572 4357 World Wide Web (http://www.epson.co.
SC-F2100 Series User's Guide Where To Get Help Fax: Help for Users in Hong Kong To obtain technical support as well as other after-sales services, users are welcome to contact Epson Hong Kong Limited.
SC-F2100 Series User's Guide Where To Get Help Location Telephone number Fax number Ahmedabad 079-26407176 / 77 079-26407347 Helpline For Service, Product info or to order a cartridge 18004250011 (9AM - 9PM) - This is a Toll-free number.
SC-F2100 Series User's Guide Software License Terms Software License Terms Open Source Software Licenses Bonjour This printer product includes the open source software programs which apply the Apple Public Source License Version1.2 or its latest version ("Bonjour Programs"). We provide the source code of the Bonjour Programs pursuant to the Apple Public Source License Version1.2 or its latest version until five (5) years after the discontinuation of same model of this printer product.
SC-F2100 Series User's Guide Software License Terms 1.6 "Modifications" mean any addition to, deletion from, and/or change to, the substance and/or structure of the Original Code, any previous Modifications, the combination of Original Code and any previous Modifications, and/ or any respective portions thereof.
SC-F2100 Series User's Guide Software License Terms 2.3 Distribution of Executable Versions. In addition, if You Externally Deploy Covered Code (Original Code and/or Modifications) in object code, executable form only, You must include a prominent notice, in the code itself as well as in related documentation, stating that Source Code of the Covered Code is available under the terms of this License with information on how and where to obtain such Source Code. 2.4 Third Party Rights.
SC-F2100 Series User's Guide Software License Terms 8. NO WARRANTY OR SUPPORT. The Covered Code may contain in whole or in part pre-release, untested, or not fully tested works. The Covered Code may contain errors that could cause failures or loss of data, and may be incomplete or contain inaccuracies. You expressly acknowledge and agree that use of the Covered Code, or any portion thereof, is at Your sole and entire risk.
SC-F2100 Series User's Guide Software License Terms (c) automatically without notice from Apple if You, at any time during the term of this License, commence an action for patent infringement against Apple; provided that Apple did not first commence an action for patent infringement against You in that instance. 12.2 Effect of Termination. Upon termination, You agree to immediately stop any further use, reproduction, modification, sublicensing and distribution of the Covered Code.
SC-F2100 Series User's Guide Software License Terms EXHIBIT A. "Portions Copyright (c) 1999-2003 Apple Computer, Inc. All Rights Reserved. This file contains Original Code and/or Modifications of Original Code as defined in and that are subject to the Apple Public Source License Version 2.0 (the 'License'). You may not use this file except in compliance with the License. Please obtain a copy of the License at http://www.opensource.apple.com/apsl/ and read it before using this file.
SC-F2100 Series User's Guide Software License Terms * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * 3. All advertising materials mentioning features or use of this * software must display the following acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" * * 4.
SC-F2100 Series User's Guide Software License Terms * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE.
SC-F2100 Series User's Guide Software License Terms * except that the holder is Tim Hudson (tjh@cryptsoft.com). * * Copyright remains Eric Young's, and as such any Copyright notices in * the code are not to be removed. * If this package is used in a product, Eric Young should be given attribution * as the author of the parts of the library used. * This can be in the form of a textual message at program startup or * in documentation (online or textual) provided with the package.
SC-F2100 Series User's Guide Software License Terms * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED.
SC-F2100 Series User's Guide Software License Terms 1. Redistributions of source code (in whole or in part) must retain the above copyright notice, definition, disclaimer, and this list of conditions. 2. Redistributions in binary form (compiled executables and libraries) must reproduce the above copyright notice, definition, disclaimer, and this list of conditions in documentation and/or other materials provided with the distribution.
