User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Media Handling
- Using the Optional Auto Take-up Reel
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Additional Settings - Windows
- Printing Your Document or Photo - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing with Windows
- Using the Control Panel Menus
- Replacing Ink Cartridges
- Adjusting Print Quality
- Maintenance
- Moving or Transporting the Product
- Solving Problems
- Technical Specifications
- Notices
130
Setting Options Description
Nozzle Check Print Nozzle Check Pattern Prints a nozzle check pattern
in the specified location on
the media.
Printless Nozzle Check Pattern Checks the nozzles and
displays the results on the
LCD screen.
Head Cleaning All Nozzles
Various colors
Normal
Heavy
Lets you clean all or selected
colors (in pairs of two), based
on the nozzle check pattern.
Select Normal cleaning first.
If nozzles are still clogged,
select Heavy cleaning.
Check and Clean
Nozzle
— Automatically checks and
cleans any clogged nozzles.
Head Alignment Auto (Bi-D)
Manual (Bi-D)
Lets you automatically or
manually align the print head
when print results are grainy
or out of focus.
Restore Settings Restores the print head
alignment to its default setting
Cutter Maintenance Adjust Cut Position
Replace Cutter
Lets you adjust or replace the
built-in cutter.
Adjust Cut Position: adjusts
the cutter position for the
leading edge in increments of
0.039 inch (1 mm) from –0.12
to 0.12 inch (–3 to 3 mm).
Replace Cutter: positions the
cutter for replacement.