User's Manual

137
Setting Options Description
Roll Paper Setup Roll End Option Lets you select what the printer
does if the roll paper runs out and is
replaced during a print job.
Stop Printing: automatically
cancels printing after paper is
replaced.
Continue: resumes printing where
the job left off.
Reprint: restarts the job from the
beginning (available only when you
are using the optional internal print
server).
Roll Paper Tension Adjusts the paper tension.
Select High or Extra High if paper
wrinkles during printing.
Refresh Margin Lets you automatically trim the
leading edge and remove any ink
stains left by the previous image
during borderless printing.
Auto Loading Automatically loads media into the
paper path. Select Off only if you
experience paper slippage,
extremely large curls in the paper,
or other serious issues.
Feed Lateral Adjust Adjusts the paper feed to reduce
paper skew. Select On if the paper
skews or Off if the paper wrinkles.
Platen Gap Standard
Wide +1
Wider +2
Widest +3
Adjusts the gap between the media
and the print head. Leave the
setting at the default for most
media. If printouts are smeared,
increase the setting.