User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Media Handling
- Using the Optional Auto Take-up Reel
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Additional Settings - Windows
- Printing Your Document or Photo - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing with Windows
- Using the Control Panel Menus
- Replacing Ink Cartridges
- Adjusting Print Quality
- Maintenance
- Moving or Transporting the Product
- Solving Problems
- Technical Specifications
- Notices
138
Setting Options Description
Drying Time Per Pass 0 seconds to 10 seconds Lets you adjust the amount of time
the head pauses between each
pass. If the image is blurring on the
paper, you may need to increase
the drying time per pass.
Paper Size Check On
Off
Automatically detects the width of
the loaded media. Turn off this
setting only if the printer displays a
paper setting error when media is
loaded correctly. Changed settings
take effect when you reload paper.
Caution: Disabling this setting may
cause the printer to print outside the
margins of the loaded media and
may cause ink to build up inside the
printer.
Paper Feed Stabilizer On
Off
Automatically detects and corrects
any paper feed pitch changes.
Disable this setting when using any
transparent or colored media.
Paper Skew Check On
Off
Stops printing when skewed paper
is detected. Leave this setting
turned on to avoid paper jams.