User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Media Handling
- Using the Optional Auto Take-up Reel
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Additional Settings - Windows
- Printing Your Document or Photo - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing with Windows
- Using the Control Panel Menus
- Replacing Ink Cartridges
- Adjusting Print Quality
- Maintenance
- Moving or Transporting the Product
- Solving Problems
- Technical Specifications
- Notices
167
6. Gently wipe the light gray areas in the direction indicated by the arrows.
Note: If you see dust or paper particles on the dark gray areas (the rollers or ink absorption pads),
use a cleaning stick to gently clean them. Do not use too much force when cleaning or touch the
rollers or the ink absorption pads with your bare hands or your prints may be affected. Do not use
cotton swabs to clean these areas.
Caution: Be careful not to touch the gears or ink tubes inside the product.
7. If your product is still dirty, dampen the cloth with a small amount of water and a mild detergent and
repeat the previous step. Wipe away any moisture with a soft, dry cloth.