User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Media Handling
- Using the Optional Auto Take-up Reel
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Additional Settings - Windows
- Printing Your Document or Photo - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing with Windows
- Using the Control Panel Menus
- Replacing Ink Cartridges
- Adjusting Print Quality
- Maintenance
- Moving or Transporting the Product
- Solving Problems
- Technical Specifications
- Notices
183
18. Close the front cover.
19. Press the OK button.
The print head returns to the printing position and the printer cleans the print head.
20. When the print head cleaning is complete, turn the printer off.
Note: If you see an error message on the LCD screen, select Cancel and clean the print head
manually. Then turn the printer off and back on.
Parent topic: Maintenance
Replacing the Cutter
If you notice that your paper does cut cleanly, you may need to replace the cutter.
1. Remove any paper from the printer.
2. Select the Maintenance tab
3. Press the Menu button.
4. Select Cutter Maintenance and press the OK button.
5. Select Replace Cutter and press the OK button.
6. Press the OK button.
The cutter moves to the replacement position.