User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Media Handling
- Using the Optional Auto Take-up Reel
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Additional Settings - Windows
- Printing Your Document or Photo - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing with Windows
- Using the Control Panel Menus
- Replacing Ink Cartridges
- Adjusting Print Quality
- Maintenance
- Moving or Transporting the Product
- Solving Problems
- Technical Specifications
- Notices
187
Moving the Product Long Distances
If you need to move the product a long distance or ship it, you should remove the product from its stand.
Note: When moving or storing the product in temperatures at or below 14 °F (–10 °C), enable the
Transportation/Storage option.
Caution: During transportation and storage, leave the ink cartridges installed to prevent the print head
from drying out.
1. Turn off the product.
2. Unplug the power cable.
3. Disconnect any connected cables.
4. Remove any paper from the product.
5. Close the roll paper cover.
6. Remove the paper basket.
7. Remove the optional Auto Take-Up Reel, if it is installed.
8. Lock the front casters.
9. Remove the three bolts and washers securing the product to the stand and keep them in a safe
place.