User's Manual

192
LCD screen message Condition/solution
Reel Unit Disconnected
Auto Take-up Reel Unit
is disconnected. Do you
continue?
The optional Auto Take-up Reel is not connected. Reconnect the unit and
select No on the LCD screen to turn off the printer. Wait a moment, then turn
the printer on.
To continue printing without the Auto Take-up Reel, select Yes on the control
panel.
Take-Up Error
Is anything obstructing
the take-up reel sensor
system?
The optional Auto Take-up Reel cannot take up media.
Check the optional Auto Take-up Reel sensor and clear any obstructions,
then press the OK button on the control panel.
If there is any loose paper on the Auto Take-up Reel roll core, set the Auto
switch to Off and hold the Manual switch in the take-up direction to remove
slack in the roll paper. Confirm that the paper is attached to the roll core
correctly, then return the Auto switch to the original position and press the
OK button.
HDD Error
HDD used for another
printer needs to be
formatted. Continue?
The inserted hard drive is not formatted or is formatted for another printer.
You must format an internal print server that has been used with another
printer before using it with your product. Select Yes on the LCD screen to
format the drive or you will not be able to print with the internal print server.
Storage Error
Check if hard disk unit is
correctly installed.
The internal print server cannot store the current print job.
Press the pause/cancel button and select Job Cancel, then remove and
reinstall the internal print server.
If the message still appears, contact Epson for support.
To continue printing regardless of the internal printer server's status, select
Print only from the Hard Disk Unit menu in the printer driver.
Data Size Error
Data size of print job is
too large. Check on print
job.
The internal print server can store individual print jobs that are up to 100GB
in size. To print larger jobs, select Print Only from the Hard Disk Unit menu
in the printer driver.