User's Manual

194
LCD screen message Condition/solution
Paper Feed Sensor
Error
Refer to the manual to
find out how to solve the
problem.
The paper feed sensor is dirty. Clean the sensor.
Perform Powerful
Cleaning on all nozzles.
You have not cleaned the print head nozzles in six months and Timer
Cleaning is set to Off.
Run a Powerful Cleaning cycle in the Administrator menu.
Maintenance Request
Replace Part
Soon/Replace Part Now
(maintenance request
code)
A part used in the printer is nearing the end of its service life. Contact Epson
for support and provide them with the displayed maintenance request code.
The error persists until you replace the requested part.
Call For Service
(service code)
Power off and then on. If
this doesn't work, note
the code and call for
service.
A call for service occurs when:
• The power cable is not connected securely
• An error occurs that cannot be cleared
When a call for service has occurred, the printer automatically stops printing.
Turn off the printer, disconnect the power cable from both the outlet and the
printer, and reconnect them. Turn the printer on and off several times. If the
same call for service is displayed on the LCD screen, contact Epson for
support and provide them with the displayed service code.
Parent topic: Solving Problems
Related concepts
Print Head Nozzle Check
Print Head Cleaning
Related references
Print Quality Options - Windows
Color Management Options - Windows
Output Resolution Settings - Mac
Advanced Color Settings - Mac
Paper Menu Settings