User's Manual

206
• If ink is smeared on your prints, clean the rollers. Load blank paper and press the cut/feed
media button to feed it through the printer.
• If you are using non-Epson media, make sure you created a custom paper configuration for the media.
• Make sure the Paper Size Check setting is set to On, or the printer may print outside the edges of the
loaded paper and smear ink on the back of the print.
• If the Auto Cut setting is set to Off, try setting the Margin Per Page setting to 65mm.
• Depending on the print density and type of paper you are using, the ink may take a while to dry. Do not
stack prints until the ink is completely dry.
• Clean around the print head.
Parent topic: Solving Print Quality Problems
Related references
Paper Menu Settings
Setup Menu Settings
Related tasks
Creating Paper Configurations
Cleaning Around the Print Head
Margins Appear in Borderless Prints
If borderless prints still have margins, try these solutions:
• Check the print settings selected in your print application you are using, as well as the printer driver.
• Make sure that the paper settings on the LCD screen match the paper you loaded.
• Paper that is stored incorrectly may expand or contract. Make sure you have stored the paper
according to the manufacturer's specifications.
• Check that the paper you are using supports borderless printing.
• If you are using roll paper, change the Adjust Cut Position setting. This may reduce the margins at
the leading edge of the print.
Parent topic: Solving Print Quality Problems
Related references
Maintenance Menu Settings
Paper Menu Settings
Borderless Paper Type Compatibility