User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Media Handling
- Using the Optional Auto Take-up Reel
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Additional Settings - Windows
- Printing Your Document or Photo - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing with Windows
- Using the Control Panel Menus
- Replacing Ink Cartridges
- Adjusting Print Quality
- Maintenance
- Moving or Transporting the Product
- Solving Problems
- Technical Specifications
- Notices
32
5. Align the right edge of the sheet with the vertical line on the roll paper cover.
6. Press the OK button.
The sheet feeds into printing position automatically.
7. Select one of these settings on the LCD screen:
• If the paper settings are correct, select Keep Settings Above.
• Select Change Settings and adjust the settings.
8. Press the OK button.
9. Run your print job.
After printing, the sheet stays in the printer.
10. To remove your print, hold the sheet and press the cut/feed media button.
Note: Store cut sheet media flat in its original packaging. Storing sheet media unprotected or on its
long or short edge can lead to excess paper curl, cause damage to the printer, and ruin your prints.