User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Media Handling
- Using the Optional Auto Take-up Reel
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Additional Settings - Windows
- Printing Your Document or Photo - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing with Windows
- Using the Control Panel Menus
- Replacing Ink Cartridges
- Adjusting Print Quality
- Maintenance
- Moving or Transporting the Product
- Solving Problems
- Technical Specifications
- Notices
34
6. Slide the poster board into the feed slot until it is flush with the front of the printer as shown. Align the
right edge with the poster board support.
Note: You may need to increase the suction by pressing the up arrow button. This helps hold the
poster board in place during loading and printing.
7. Press the OK button.
The poster board feeds into the printer.
8. Select one of these settings on the LCD screen:
• If the paper settings are correct, select Keep Settings Above.
• Select Change Settings and adjust the settings.
Note: Make sure you select Enhanced Board as the Media Type setting in the Others menu.
9. Press the OK button.
10. Run your print job.
After printing, the sheet stays in the printer.