User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Media Handling
- Using the Optional Auto Take-up Reel
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Additional Settings - Windows
- Printing Your Document or Photo - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing with Windows
- Using the Control Panel Menus
- Replacing Ink Cartridges
- Adjusting Print Quality
- Maintenance
- Moving or Transporting the Product
- Solving Problems
- Technical Specifications
- Notices
57
18. Connect the other end of the USB cable to the port on the back of the auto take-up reel.
19. Coil the excess cable and secure it using the cable clamp on the bottom of the printer stand.
20. Connect the power cord to the AC inlet on the back of the auto take-up reel and route the cord
through the same cable clamp as the printer's power cord.
21. Plug the auto take-up reel power cord into an electrical outlet.
Parent topic: Using the Optional Auto Take-up Reel
Attaching the Roll Core to the Auto Take-up Reel
You need to attach the roll core to the auto-take up reel before you can load paper onto the take-up reel.