User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Media Handling
- Using the Optional Auto Take-up Reel
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Additional Settings - Windows
- Printing Your Document or Photo - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing with Windows
- Using the Control Panel Menus
- Replacing Ink Cartridges
- Adjusting Print Quality
- Maintenance
- Moving or Transporting the Product
- Solving Problems
- Technical Specifications
- Notices
64
Note: Make sure Auto Cut is set to Off when you use the auto take-up reel.
1. Press the load/remove paper button on the printer.
2. Select Use Take-up Unit and press the OK button.
Paper automatically feeds until the edge of the roll media reaches the roll core.
3. Wind the edge of the media around the front of the roll core.
4. Tape the edge of the media to the center of the core, then tape the edge to the left and right ends.
5. Press the right arrow button on the printer.
6. Make sure the Auto switch on the take-up reel is in the Off position and press the OK button on the
printer.