User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Media Handling
- Using the Optional Auto Take-up Reel
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Additional Settings - Windows
- Printing Your Document or Photo - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing with Windows
- Using the Control Panel Menus
- Replacing Ink Cartridges
- Adjusting Print Quality
- Maintenance
- Moving or Transporting the Product
- Solving Problems
- Technical Specifications
- Notices
76
6. Adjust the flange on the left side of the tensioner so that there is a gap of about 0.25 inch (6 mm)
between the flange and the roll paper.
Parent topic: Using the Optional Auto Take-up Reel
Removing Media from the Optional Auto Take-up Reel
After printing on media loaded on the optional auto take-up reel, follow these steps to remove it.
Note: Two people are required to remove media from the auto take-up reel.
1. Remove the tensioner.