User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Media Handling
- Using the Optional Auto Take-up Reel
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Additional Settings - Windows
- Printing Your Document or Photo - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing with Windows
- Using the Control Panel Menus
- Replacing Ink Cartridges
- Adjusting Print Quality
- Maintenance
- Moving or Transporting the Product
- Solving Problems
- Technical Specifications
- Notices
77
2. Move the support bar to the storage position.
3. Do one of the following:
• If the Take-up After Cut setting is set to On, press the cut/feed media button to cut the
media manually. Support the media with your hands to keep the prints off of the floor while it is
automatically rolled onto the take-up reel.
• If the Take-up After Cut setting is set to Off, move the Auto switch on the take-up reel to the Off
position. Press the cut/feed media button to cut the media manually. Hold the Manual
switch on the take-up reel in the Forward or Backward position depending on whether the
printable side of the media faces outwards or inwards.
4. Tape the end of the roll to itself to prevent it from unwinding.