User's Manual

132
Setting Options Description
Nozzle Check — Prints a nozzle check pattern
in the specified location on
the media.
Head Cleaning All Nozzles
Various colors
Normal
Power
Lets you clean all or selected
colors (in pairs of two), based
on the nozzle check pattern.
Select the Normal cleaning
first. If nozzles are still
clogged, select the Power
cleaning.
Head Alignment Auto Uni-D
Bi-D 2-color
Bi-D All Color
Bi-D #1 to #4
Lets you align the print head
when print results are grainy
or out of focus:
Uni-D: when printing in one
direction.
Various Bi-D settings: when
printing in both directions. If
head alignment with this
setting does not correct the
problem, select Uni-D.
Manual Uni-D
Bi-D 2-color
Bi-D All Color
Cutter Maintenance Adjust Cut Position
Replace Cutter
Lets you adjust or replace the
built-in cutter.
Adjust Cut Position: adjusts
the cutter position in
increments of 0.039 inch
(1 mm) from –0.12 to 0.12
inch (–3 to 3 mm).
Replace Cutter: positions the
cutter for replacement.
Parent topic: Using the Control Panel Menus
Related tasks
Checking the Nozzles Using the Product Control Panel
Cleaning the Print Head Using the Product Control Panel