User's Manual

Parent topic: Media Handling

Loading Cut Sheets

Always load cut sheet paper in the portrait orientation (short edge first). You can load most photo and

fine art sheet papers up to 19 mil (0.5 mm) thick without pressing the load paper button.

Note: Make sure the paper path is clear and any roll paper is rolled up before you load cut sheet paper.

1. Make sure the printer is turned on and the roll paper cover is closed.

2. Press the paper source button.

3. Select Cut Sheet and press the OK button.

4. Feed the sheet into the right side of the paper slot until it meets resistance. Align the sheet with the

vertical line on the roll paper cover.