User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Wired Networking
- Media Handling
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Additional Settings - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Printing Your Document or Photo - Windows
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing with Windows
- Using the Control Panel Menus
- Replacing Ink Cartridges and Maintenance Boxes
- Adjusting Print Quality
- Maintenance and Transportation
- Solving Problems
- Technical Specifications
- Notices
214
16. If there is any lint or dust in the suction caps, remove it with a cleaning stick or a pair of tweezers.
17. Close the front cover.
18. Attach the front maintenance cover and close the ink cartridge cover.
19. Select OK to return the print head to its home position.
Parent topic: Maintenance and Transportation
Related tasks
Removing Roll Paper
Moving or Transporting Your Product
If you need to move or transport your product, prepare it as described here. Moving the printer assumes
that you are moving it to another location on the same floor, without using elevators, ramps, or stairs. If
you are moving the printer between floors or to another building, follow the instructions for transporting
your product.
Warning: Use only the indicated locations to lift the printer. Otherwise, the printer may be damaged or
you may be injured.