User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Wired Networking
- Media Handling
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Additional Settings - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Printing Your Document or Photo - Windows
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing with Windows
- Using the Control Panel Menus
- Replacing Ink Cartridges and Maintenance Boxes
- Adjusting Print Quality
- Maintenance and Transportation
- Solving Problems
- Technical Specifications
- Notices
31
8. Press the home button to exit.
You should be able to connect to your product directly from your computer or device, and then print.
If you are printing from a computer, make sure you installed the printer software from the Epson
website.
Parent topic: Wired Networking
Related tasks
Accessing the Web Config Utility
Setting a Proxy Server from the Control Panel
You can set a proxy server using your product control panel (as described below) or the Web Config
utility.
You need to set up a proxy server if your network uses a proxy server to access the internet and you
want to update the product firmware using Web Config.
Note: This setting can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
1. Press the home button, if necessary.
2. Select Menu > General Settings > Network Settings > Advanced > Proxy Server.
Note: If you already set the product's IP address, selecting Menu may display the Advanced menu
directly. If so, just select Proxy Server.