User's Manual

104
10. If you want your printout to be a different size than the displayed Paper Size setting, select the
Output Size setting in the dropdown menu.
Note: Select Specify Size to set a user-defined output size.
11. Select the Paper Source setting that matches the paper feeding method you are using.
Note: If you select Roll Paper, select the width of the roll as the Roll Paper Width setting.
12. Select the Media Type setting that matches the paper you loaded.
Note: If you want to use paper settings that have been set in the printer's control panel, select Use
Printer Settings.
Note: Click Acquire Info to refresh the settings if you loaded or changed paper after opening the
print window.
13. Select the Select Target setting that matches the document you are printing.
Note: If you want the printer driver to determine print settings based on the document type, select
the Simple Settings checkbox. Deselect the checkbox if you want to select your own color
correction, print mode, or other settings.
14. If you want to prioritize quality over print speed, select Print with High Quality .
15. If you deselect the Simple Settings checkbox, the following options are available:
• Print Mode: choose a printout color
• Color Mode: choose a color mode to fine-tune printout colors
• Level: choose speed or quality as the printing priority
• High Speed: select to speed up printing, but quality may be reduced
• Emphasize Thin Lines: select to smooth out jagged edges in low-resolution images
Note: The Emphasize Thin Lines setting may reduce print speed, especially if the printer is
connected wirelessly. If you enable this setting, use a wired connection.
Note: Available options depend on the selected Select Target setting.