User's Manual

126
Setting Options Description
Advanced Media Setting Platen Gap Select a larger value if print results are
smudged by print head strikes
Top/Bottom Margins The Standard margins are as follows for the
top and bottom:
• CAD/line drawings: 3 mm
• Other: 30 mm
Select a different value as necessary.
Note: Left and right margins are always 3
mm.
Back Tension Select High or Extra High if paper wrinkles
during printing
Drying Time Drying Time per Pass: Select from 0 to 10
seconds for the amount of time the print head
pauses to allow drying after each pass
Drying Time per Page: Select from 0 to 60
minutes for the amount of time the printer
pauses to allow drying after each page is
printed
Auto Cut Select On to automatically cut roll paper after
each page is printed, or select Off to cut paper
manually
Restore Default — Restores the custom setting to the defaults
Universal Print Settings
Setting Options Description
Paper Source Roll Paper
Auto Sheet Feeder
Cut Sheet (1 sheet)
Select the paper source from which you want
to print