User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Wi-Fi or Wired Networking
- Media Handling
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Advanced Settings - Windows
- Selecting Additional Settings - Windows
- Printing Your Document - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing CAD Drawings
- Printing with Windows
- Using the Control Panel Menus
- Refilling Ink
- Adjusting Print Quality
- Maintenance and Transportation
- Solving Problems
- Technical Specifications
- Windows System Requirements
- Mac System Requirements
- Paper Specifications
- Printable Area Specifications
- Ink Specifications
- Dimension Specifications
- Electrical Specifications
- Environmental Specifications
- Interface Specifications
- Network Interface Specifications
- Safety and Approvals Specifications
- Safety and Approvals Specifications for Latin America
- Notices
146
13. Follow the on-screen instructions to reset the ink level for the colors you refilled.
Parent topic: Refilling Ink
Replacing the Maintenance Box
Replace the maintenance box when a message is displayed on the LCD screen telling you that the
maintenance box is near or at the end of its service life.
Note: You can view the replacement procedure on the LCD screen. Press the home button if
necessary and select Settings > Maintenance > Replace Maintenance Box > See Guide.
1. Open the maintenance box cover on the back of the product.
2. Pull out the maintenance box carefully without tilting it.
Warning: If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes,
flush them immediately with water. If ink gets into your mouth, spit it out and see a doctor right away.
3. Remove the new maintenance box from the package.
Caution: Do not touch the chip on the side of the maintenance box or you may damage the product.