User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Wi-Fi or Wired Networking
- Media Handling
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Advanced Settings - Windows
- Selecting Additional Settings - Windows
- Printing Your Document - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing CAD Drawings
- Printing with Windows
- Using the Control Panel Menus
- Refilling Ink
- Adjusting Print Quality
- Maintenance and Transportation
- Solving Problems
- Technical Specifications
- Windows System Requirements
- Mac System Requirements
- Paper Specifications
- Printable Area Specifications
- Ink Specifications
- Dimension Specifications
- Electrical Specifications
- Environmental Specifications
- Interface Specifications
- Network Interface Specifications
- Safety and Approvals Specifications
- Safety and Approvals Specifications for Latin America
- Notices
153
Cleaning the Print Head Using a Computer Utility
Using the Powerful Cleaning Utility
Flushing the Ink Tubes
Parent topic: Print Head Maintenance
Cleaning the Print Head Using the Product Control Panel
You can clean the print head using the control panel on your product.
1. Make sure roll paper or cut sheet paper is loaded in the printer.
2. Press the home button, if necessary.
3. Select Settings > Maintenance > Head Cleaning.
You see a screen like this:
4. Select Start to begin the cleaning cycle.
When the cleaning cycle is finished, the power light stops flashing and a confirmation screen
appears.
Caution: Never open any covers or turn off the product during a cleaning cycle or you may damage
it.
5. Select Yes to print a nozzle check pattern.
The nozzle pattern prints.