User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Wi-Fi or Wired Networking
- Media Handling
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Advanced Settings - Windows
- Selecting Additional Settings - Windows
- Printing Your Document - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing CAD Drawings
- Printing with Windows
- Using the Control Panel Menus
- Refilling Ink
- Adjusting Print Quality
- Maintenance and Transportation
- Solving Problems
- Technical Specifications
- Windows System Requirements
- Mac System Requirements
- Paper Specifications
- Printable Area Specifications
- Ink Specifications
- Dimension Specifications
- Electrical Specifications
- Environmental Specifications
- Interface Specifications
- Network Interface Specifications
- Safety and Approvals Specifications
- Safety and Approvals Specifications for Latin America
- Notices
163
Maintenance and Transportation
See the instructions in these sections to maintain your printer for optimum results, or to move or
transport your printer.
Replacing the Cutter
Before Moving or Transporting Your Product
After Moving or Transporting Your Product
Replacing the Cutter
If you notice that your paper does not cut cleanly, you may need to replace the cutter. You will need a
Phillips-head screwdriver.
Caution: Do not remove the protective material from the new cutter until instructed to do so. Do not drop
the cutter or knock it against anything or you may chip the blade.
1. Press the home button, if necessary.
2. Select Settings > Maintenance > Replace Cutter > Start.
3. Open the cutter cover.