User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Wi-Fi or Wired Networking
- Media Handling
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Advanced Settings - Windows
- Selecting Additional Settings - Windows
- Printing Your Document - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing CAD Drawings
- Printing with Windows
- Using the Control Panel Menus
- Refilling Ink
- Adjusting Print Quality
- Maintenance and Transportation
- Solving Problems
- Technical Specifications
- Windows System Requirements
- Mac System Requirements
- Paper Specifications
- Printable Area Specifications
- Ink Specifications
- Dimension Specifications
- Electrical Specifications
- Environmental Specifications
- Interface Specifications
- Network Interface Specifications
- Safety and Approvals Specifications
- Safety and Approvals Specifications for Latin America
- Notices
200
Printable Area Specifications
Roll paper
Note: Margins may change depending on the Top/Bottom Margins setting that you select. The
numbers below are the standard settings.
1 Printable width: 8.27 to 24 inches (210 to 610 mm)
2 Printable length: 11 to 708.67 inches (279.4 to 18000 mm)
3 Left/right margin: 0.12 inch (3 mm) minimum
4 Bottom margin: 0.12 to 1.77 inches (3 to 45 mm)
5 Top margin: 0.12 to 1.18 inches (3 to 30 mm)