User's Manual
Table Of Contents
- Introduction
- Basic Operations
- Loading and Removing the Roll Paper
- Loading and Removing Cut Sheets
- Loading and Removing Poster Board
- Viewing and Changing Media Settings
- Replacing Paper
- Using the Paper Basket (T7270/T5270/T3270)
- Using the Large-Capacity Paper Basket (T7270D/T5270D)
- Using the Auto Take-up Reel Unit (T7270 Only)
- Basic Printing Methods (Windows)
- Basic Printing Methods (OS X)
- Printable area
- Using the Power Off Timer
- Canceling Printing
- Saving to and Reprinting on the Optional Hard Disk Unit
- Copying and Scanning
- Print From Folder
- More Ways to Print
- Enlargements and Horizontal and Vertical Banners
- Printing at Non-Standard Sizes
- Printing CAD Drawings
- Switching Roll Paper Automatically before Printing (T7270D/T5270D Only)
- Borderless Printing
- Correct color and print
- Multi-Page/Poster Printing
- Printing Multiple Documents (the Layout Manager) (Windows Only)
- Color Management Printing
- Tips for Using the Printer Driver (Windows)
- Tips for Using the Printer Driver (OS X)
- Using the Control Panel Menu
- Maintenance
- Problem Solver
- Appendix
- Where To Get Help
- Software License Terms
Epson SureColor T-Series User’s Guide
More Ways to Print
101
Setting Procedures for Printing
Making Settings in Windows
1
Display the printer driver's Printer Settings tab
and adjust the following settings.
U“Basic Printing Methods (Windows)” on
page 59
2
Select Borderless in the Size Settings area.
To fit output to the roll width, choose Fit to Roll
Paper Width before selecting Borderless.
3
In the Layout tab Borderless Enlargement
Setting area, select either Auto Expand or
Retain Size.
If Auto Expand is selected, click Amount of
Enlargement and choose the amount cut off at
the edges.
4
When roll paper is used, Auto Cut options are
available in the Advanced tab Roll Paper
Option area.
U“About Roll Paper Cutting” on page 100
Note:
Retain Size is not available when Fit to Roll
Paper Width is selected in the Printer Settings tab
or Reduce/Enlarge is selected in the Layout tab.
Max : 3 mm for left and 5 mm for right
(the image shifts 1 mm to the right)
Standard : 3 mm for left and right
Min : 1.5 mm for left and right
Note:
Moving the slider towards Min decreases the
image enlargement ratio. Therefore, some margins
may appear at the edges of the paper depending on
the paper and printing environment.