User's Manual
Table Of Contents
- Introduction
- Basic Operations
- Loading and Removing the Roll Paper
- Loading and Removing Cut Sheets
- Loading and Removing Poster Board
- Viewing and Changing Media Settings
- Replacing Paper
- Using the Paper Basket (T7270/T5270/T3270)
- Using the Large-Capacity Paper Basket (T7270D/T5270D)
- Using the Auto Take-up Reel Unit (T7270 Only)
- Basic Printing Methods (Windows)
- Basic Printing Methods (OS X)
- Printable area
- Using the Power Off Timer
- Canceling Printing
- Saving to and Reprinting on the Optional Hard Disk Unit
- Copying and Scanning
- Print From Folder
- More Ways to Print
- Enlargements and Horizontal and Vertical Banners
- Printing at Non-Standard Sizes
- Printing CAD Drawings
- Switching Roll Paper Automatically before Printing (T7270D/T5270D Only)
- Borderless Printing
- Correct color and print
- Multi-Page/Poster Printing
- Printing Multiple Documents (the Layout Manager) (Windows Only)
- Color Management Printing
- Tips for Using the Printer Driver (Windows)
- Tips for Using the Printer Driver (OS X)
- Using the Control Panel Menu
- Maintenance
- Problem Solver
- Appendix
- Where To Get Help
- Software License Terms
Epson SureColor T-Series User’s Guide
More Ways to Print
102
5
Check other settings, and then start printing.
Making Settings for OS X
1
Open the Print screen and select the paper size
from the Paper Size option, and then select a
borderless printing method.
U“Basic Printing Methods (OS X)” on page 62
The selections for borderless printing methods
are displayed as shown below.
XXXX (Roll Paper - Borderless (Auto Expand))
XXXX (Roll Paper - Borderless (Retain Size))
XXXX (Sheet - Borderless (Auto Expand))
XXXX (Sheet - Borderless (Retain Size))
Where XXXX is the actual paper size, such as
A4.
2
If Auto Expand is selected for paper size, select
Page Layout Settings from the list and click
Expansion.
The following section shows how much the
image will be larger than the paper edges.
3
When using roll paper, select Advanced from
the list and choose an Auto Cut option.
U“About Roll Paper Cutting” on page 100
4
Check other settings, and then start printing.
Note:
If page setting options are not available in the
application's print dialog, display the page settings
dialog.
Max : 3 mm for left and 5 mm for right
(the image shifts 1 mm to the right)
Standard : 3 mm for left and right
Min : 1.5 mm for left and right
Note:
Moving the slider towards Min decreases the
image enlargement ratio. Therefore, some margins
may appear at the edges of the paper depending on
the paper and printing environment.