User's Manual
Table Of Contents
- Introduction
- Basic Operations
- Loading and Removing the Roll Paper
- Loading and Removing Cut Sheets
- Loading and Removing Poster Board
- Viewing and Changing Media Settings
- Replacing Paper
- Using the Paper Basket (T7270/T5270/T3270)
- Using the Large-Capacity Paper Basket (T7270D/T5270D)
- Using the Auto Take-up Reel Unit (T7270 Only)
- Basic Printing Methods (Windows)
- Basic Printing Methods (OS X)
- Printable area
- Using the Power Off Timer
- Canceling Printing
- Saving to and Reprinting on the Optional Hard Disk Unit
- Copying and Scanning
- Print From Folder
- More Ways to Print
- Enlargements and Horizontal and Vertical Banners
- Printing at Non-Standard Sizes
- Printing CAD Drawings
- Switching Roll Paper Automatically before Printing (T7270D/T5270D Only)
- Borderless Printing
- Correct color and print
- Multi-Page/Poster Printing
- Printing Multiple Documents (the Layout Manager) (Windows Only)
- Color Management Printing
- Tips for Using the Printer Driver (Windows)
- Tips for Using the Printer Driver (OS X)
- Using the Control Panel Menu
- Maintenance
- Problem Solver
- Appendix
- Where To Get Help
- Software License Terms
Epson SureColor T-Series User’s Guide
Using the Control Panel Menu
137
Printer Status Firmware Version xxxxxxx,x.xx,xxxx
Option Status Displays the options connected.
Show Total Prints XXXXXX m
2
Print Status Sheet Press Z to start printing.
Network Setup IP Address Setting Auto -
Panel IP Address, Subnet Mask, Default Gateway
IPv6 Setting Enable, Disable
IPsec Setting Enable, Disable
PSK Setting Set key at 20 characters or less (half-size characters or
symbols)
IEEE802.1x Setting Enable, Disable
HTTPS Redirect Setting Enable, Disable
Print Status Sheet Press Z to start printing.
Restore Settings Yes, No
Power Settings Sleep Mode 5 to 210 minutes
Power Off Timer Off, 1 to 24 hours
Restore Settings Yes, No
Preference Language Lists the supported languages.
Unit: Length m, ft/in
Alert Lamp Setting On, Off
Menu item Description