User's Manual
Table Of Contents
- Introduction
- Basic Operations
- Loading and Removing the Roll Paper
- Loading and Removing Cut Sheets
- Loading and Removing Poster Board
- Viewing and Changing Media Settings
- Replacing Paper
- Using the Paper Basket (T7270/T5270/T3270)
- Using the Large-Capacity Paper Basket (T7270D/T5270D)
- Using the Auto Take-up Reel Unit (T7270 Only)
- Basic Printing Methods (Windows)
- Basic Printing Methods (OS X)
- Printable area
- Using the Power Off Timer
- Canceling Printing
- Saving to and Reprinting on the Optional Hard Disk Unit
- Copying and Scanning
- Print From Folder
- More Ways to Print
- Enlargements and Horizontal and Vertical Banners
- Printing at Non-Standard Sizes
- Printing CAD Drawings
- Switching Roll Paper Automatically before Printing (T7270D/T5270D Only)
- Borderless Printing
- Correct color and print
- Multi-Page/Poster Printing
- Printing Multiple Documents (the Layout Manager) (Windows Only)
- Color Management Printing
- Tips for Using the Printer Driver (Windows)
- Tips for Using the Printer Driver (OS X)
- Using the Control Panel Menu
- Maintenance
- Problem Solver
- Appendix
- Where To Get Help
- Software License Terms
Epson SureColor T-Series User’s Guide
Using the Control Panel Menu
148
Auto Loading
*1
On
*
Normally, leave the setting at On.
If you experience problems with automatic loading when you
use commercially available paper because of lack of tension,
slipperiness, extremely large curls, or other problems, set to Off.
Remove all paper before configuring this setting. If paper is
loaded, the setting cannot be changed.
While the setting is Off, the Roll 2 unit cannot be used.
Off
Roll Switch Setting
*1
Auto
*
Select the action to take when the roll currently in use is under
the following conditions: automatically switch between Roll 1
and Roll 2 and print (Auto) / print fixed to Roll 1 (Roll 1)/print
fixed to Roll 2 (Roll 2).
O The roll is finished, and there is data still to be printed.
O The printer predicts that there is not enough roll paper
remaining, and printing cannot be completed.
O The print margin will be large for the width of the print job.
When the setting is Auto, the roll is switched according to the
Roll Switch Condition setting.
Roll 1
Roll 2
Item Description