User's Manual

Epson SureColor T-Series User’s Guide
Using the Control Panel Menu
150
Less Head Scuffing On If the paper is thick, the print head may scuff the print surface. Choose On
to prevent scuffing. This option can be used to temporarily change the
value selected for Custom Paper Setting > Platen Gap in the Paper
menu. Note, however, that On has no effect when Wider is selected for
Platen Gap.
Off
*
Drying Time Per Page Off to 60 minutes
(Off
*
)
Specify how long the printer pauses to allow the ink to dry after printing
each page; choose from values between 0 and 60 minutes. Depending
on the ink density or paper type, the ink may take a while to dry. If the ink
blurs on the paper, set a longer time for drying the ink.
The longer the drying time, the more time required for printing.
Paper Size Check On
*
Choose whether the printer automatically detects (On) or does not
detect (Off) the paper width. Try choosing Off if a paper setting error is
displayed when the paper is correctly loaded. Note, however, that the
printer may print outside the paper when Off is selected. If it prints
beyond the edges of the paper, the inside of the printer becomes dirty
with ink. We generally recommend to operate with this setting set to On.
The changed settings are applied after the paper is reloaded. Note that
they are not applied if you just change the menu items.
Off
Paper Skew Check On
*
If On is selected, an error will be displayed in the control panel and
printing will stop if the paper is skewed; select Off to disable this feature.
On is recommended in most circumstances as skewed paper may cause
the printer to jam.
Off
Store Held Job
*2, *3
On This setting is displayed if an optional hard disk unit or Adobe PostScript
3 Expansion Unit is connected. If On is selected, print jobs that require a
paper type, source, or output paper size (width) that differs from those
currently selected with the printer will be saved as held jobs; select Off to
disable this feature.
If Off is selected, an error will be displayed and will printing will stop if
the source selected for the print job does not match that selected with
the printer.
When On is selected, printing will not stop if an error occurs; instead, jobs
with non-matching settings will be saved to the hard disk unit or Adobe
PostScript 3 Expansion Unit as held jobs. Held jobs can be printed from
the Print Queue menu after the printer has been readied by, for example,
loading the correct type of paper.
U“Function Summary” on page 69
Off
*
USB Timeout 10 to 600 seconds
(10
*
)
If printing stops mid-way when the printer and computer are connected
by a USB cable, set a longer time.
Quick Cut On
*
Specify the cutting operation for printing multiple page jobs.
If you turn this On, while the next job is printing, the preceding print job
is cut when its end reaches the cutting position. This shortens the
printing time because printing and cutting are done in tandem.
However, this function is enabled when the following settings are done
in the printer driver.
O Plain Paper is selected for Media Type.
O Speed is selected as the Resolution for Print Quality.
Details for cutting operations are the same as Single Cut for Borderless
printing.U“About Roll Paper Cutting” on page 100
If you turn this OFF, the next job starts printing after the preceding print
job is fed to its cutting position and cutting is completed.
Off
Item Description