User's Manual
Table Of Contents
- Introduction
- Basic Operations
- Loading and Removing the Roll Paper
- Loading and Removing Cut Sheets
- Loading and Removing Poster Board
- Viewing and Changing Media Settings
- Replacing Paper
- Using the Paper Basket (T7270/T5270/T3270)
- Using the Large-Capacity Paper Basket (T7270D/T5270D)
- Using the Auto Take-up Reel Unit (T7270 Only)
- Basic Printing Methods (Windows)
- Basic Printing Methods (OS X)
- Printable area
- Using the Power Off Timer
- Canceling Printing
- Saving to and Reprinting on the Optional Hard Disk Unit
- Copying and Scanning
- Print From Folder
- More Ways to Print
- Enlargements and Horizontal and Vertical Banners
- Printing at Non-Standard Sizes
- Printing CAD Drawings
- Switching Roll Paper Automatically before Printing (T7270D/T5270D Only)
- Borderless Printing
- Correct color and print
- Multi-Page/Poster Printing
- Printing Multiple Documents (the Layout Manager) (Windows Only)
- Color Management Printing
- Tips for Using the Printer Driver (Windows)
- Tips for Using the Printer Driver (OS X)
- Using the Control Panel Menu
- Maintenance
- Problem Solver
- Appendix
- Where To Get Help
- Software License Terms
Epson SureColor T-Series User’s Guide
Using the Control Panel Menu
155
Mirror On Select whether to flip horizontally (mirror) using the center of the Output
Size width as the basis line and then print (On) or print without flipping
horizontally (Off).
If an angle is specified for Rotate, the rotated result is flipped
horizontally.
Off
*
Select Palette Software
*
From the following selections, choose the palette that specifies the color
and thickness of the logical pen.
O Software: Print according to the pen configurations set in the
application, and ignore the built-in palette of the printer.
O Default: Print according to the settings of the built-in palette of the
printer specified in advance. The settings of the palette cannot be
changed. The built-in palette specifies a logical pen with a pen
width of 0.35 mm and 256 colors. For a sample of colors that
correspond to the color numbers, see the included "Color
Palette.pdf".
"Color Palette.pdf" recommends checking a print result that was
printed with Print Quality set to CAD / Line Drawing (Color) in the
included printer driver.
O Palette A/Palette B: The printer prints according to the settings of
the built-in palette that you specified for Define Palette. If Define
Palette setting is not set, the results are the same as when Default
is selected.
When Default/Palette A/Palette B is set, the pen configurations set in
the application are ignored.
Default
Palette A
Palette B
Define Palette Palette A
*
You can define a unique built-in palette by specifying the pen width and
color for the 16 types of logical pen. There are two types of definable
built-in palettes: Palette A and Palette B. Select a palette to be defined,
select Pen Number, and then define the Pen Width and Pen Color for
each pen. For a sample of colors that correspond to the color numbers,
see the included "Color Palette.pdf".
"Color Palette.pdf" recommends checking a print result that was printed
with Print Quality set to CAD / Line Drawing (Color) in the included
printer driver.
Palette B
Item Description