User's Manual

Epson SureColor T-Series User’s Guide
Using the Control Panel Menu
159
Power Settings
Preference
IPsec Setting Enable Select whether to enable or disable the IPsec function.
Disable
*
PSK Setting Enter a Pre-Shared Key of up to 20 characters (half-width alphanumeric characters and symbols).
IEEE802.1x Setting Enable Select whether to enable or disable the IEEE802.1X function.
Disable
*
HTTPS Redirect Setting Enable Select whether to enable or disable the function to auto-direct
HTTP to HTTPS.
Disable
*
Print Status Sheet Press the Z button to print a list of the Network Setup. Use this information for a complete
overview of network settings.
Restore Settings Yes Select Yes to restore all Network Setup content to default
values.
No
Item Description
Sleep Mode 5 to 210 minutes (15
*
) The printer will enter sleep mode if no errors have occurred, no
print jobs have been received, and no actions are performed on
the control panel for an extended period of time. This setting
selects the amount of time until the printer enters sleep mode.
U“Using the Power Off Timer” on page 66
Power Off Timer Off The printer turns off automatically when there are no errors, no
print jobs being received, and no control panel or other
operations are performed for eight hours.
The delay before the printer turns off can be selected from values
between 1 and 24 hours in increments of 1 hour.
Choose Off to prevent the printer turning off automatically.
1 to 24 hours (8
*
)
Restore Settings Yes Select Yes to restore all Eco Settings to default values.
No
Item Description
Language Japanese, English, French,
Italian, German,
Portuguese, Spanish,
Dutch, Russian, Korean,
Chinese
Select the language used on the control panel's screen.
Unit: Length m
*
Select the unit of length which is displayed on the control panel's
screen or printed on the patterns.
ft/in
Alert Lamp Setting On
*
Choose whether the large alert lamp lights (On) or does not light
(Off) when an error occurs.
Off
Item Description