User's Manual

Epson SureColor T-Series User Guide
Introduction
16
A Message
Displays the printer’s status, operation, and error
messages.
U“What to do When a Message is Displayed” on page
179
B Tabs/Info Display Area
The tab/info display area contains the seven tabs listed
below.
Use the l/r buttons to select a tab.
Information on the selected tab appears in the info
display area.
: Scan File Options Tab
Tab appears only when the optional hard disk
unit or Adobe PostScript 3 Expansion Unit
(hereinafter referred to as the hard disk) is
installed.
Scan file operations are done as shown below.
O Receiving scanned files sent from the
printer on which is installed the optional
MFP scanner.
O Printing and forwarding of scanned files
saved to the hard disk.
U“Operations for Image Files that were
Scanned or Received” on page 81
: The Large Copy Tab
This tab is displayed only when the optional
Multifunction Scanner is connected.
In this tab, select a job you want to do, and then
press the Z button. When the optional hard
disk unit or Adobe PostScript 3 Expansion Unit is
installed, you can also use the scan function.
U“Large Copying and Large Scanning using
the Multifunction Scanner (Option)” on page 73
, : The Print Queues Tab
Print job information appears in the info display
area.
When you press the Menu button, the Print
Queues menu appears.
U“Print Queues menu” on page 140
The Info Display Area
The name of the job being printed appears
when the printer driver is used.
If an optional hard disk unit or Adobe PostScript
3 Expansion Unit is installed, it also shows the
number of held jobs, if any.
c
Important:
A flashing , icon indicates that an optional
hard disk unit or Adobe PostScript 3
Expansion Unit is transmitting data to the
printer. Do not disconnect the power cord or
turn the printer off while the icon is flashing.
Failure to observe this precaution could
corrupt the data on the hard disk unit or
Adobe PostScript 3 Expansion Unit.
. : The Paper Tab
The information of loaded paper appears in the
info display area.
When you press the Menu button, the Paper
menu appears.
U“Paper menu” on page 142
The Info Display Area
Displays the Source and Media Type of the
loaded paper.
When roll paper is used, it also shows the roll
width. When Roll Paper Remaining is On, it
shows the amount of roll paper remaining.
When the length remaining reaches or falls
below the value selected for Remaining Alert, a
icon appears above the tab icon and an
alert like that shown below is displayed to warn
that the printer is nearing the end of the roll.
When roll paper is loaded on Roll 1/Roll 2 of the
T7270D/T5270D, you can check which is
selected (in use) by looking at the icon.
: Indicates a roll that is selected (in use).
The number indicates either Roll 1 or
Roll 2.