User's Manual
Table Of Contents
- Introduction
- Basic Operations
- Loading and Removing the Roll Paper
- Loading and Removing Cut Sheets
- Loading and Removing Poster Board
- Viewing and Changing Media Settings
- Replacing Paper
- Using the Paper Basket (T7270/T5270/T3270)
- Using the Large-Capacity Paper Basket (T7270D/T5270D)
- Using the Auto Take-up Reel Unit (T7270 Only)
- Basic Printing Methods (Windows)
- Basic Printing Methods (OS X)
- Printable area
- Using the Power Off Timer
- Canceling Printing
- Saving to and Reprinting on the Optional Hard Disk Unit
- Copying and Scanning
- Print From Folder
- More Ways to Print
- Enlargements and Horizontal and Vertical Banners
- Printing at Non-Standard Sizes
- Printing CAD Drawings
- Switching Roll Paper Automatically before Printing (T7270D/T5270D Only)
- Borderless Printing
- Correct color and print
- Multi-Page/Poster Printing
- Printing Multiple Documents (the Layout Manager) (Windows Only)
- Color Management Printing
- Tips for Using the Printer Driver (Windows)
- Tips for Using the Printer Driver (OS X)
- Using the Control Panel Menu
- Maintenance
- Problem Solver
- Appendix
- Where To Get Help
- Software License Terms
Epson SureColor T-Series User’s Guide
Problem Solver
192
7
After removing the paper, press the Z button.
Reload the paper and resume printing.
U“Attaching the Roll Paper Adapter” on page
29
Cut sheets jam
To remove jammed paper, follow the steps below:
1
Turn off the printer.
2
Turn the printer on.
After a pause, the message Open printer cover
then tear off and remove jammed portion. will
appear in the display.
3
Open the printer cover and move the print head
away from the jam.
4
Cut the top portion of any torn or crinkled areas
using a commercially available cutter.
5
After removing the any torn or crinkled area,
press the Z button and close the printer cover.
6
Remove the cut paper.
(
3
)
Close the rear cover, and then tighten the three
fixing screws.
c
Important:
Before you reload the roll paper, cut the edge
straight horizontally. Cut any wavy or
creased sections.
If there is a problem at the edge, decreased
print quality and paper jams may occur.
!
Caution:
If you opened the printer cover in operation, do
not touch the area as indicated by the warning
labels.
High temperatures may cause burns.
c
Important:
Other than when you are removing paper
jams, do not touch the print head. If you
touch the print head with your hand, static
electricity may cause a malfunction.