User's Manual

Epson SureColor T-Series User’s Guide
Basic Operations
29
Basic Operations
Loading and Removing
the Roll Paper
Load roll paper after attaching the supplied roll paper
adapters.
On the T7270D/T5270D, the methods for loading roll
paper on Roll 1 and Roll 2 are different. After attaching
the roll paper adapter, see the following sections.
Loading on Roll 1U“Loading Roll Paper on Roll 1”
on page 30
Loading on Roll 2U“Loading Roll 2
(T7270D/T5270D only)” on page 33
Attaching the Roll Paper
Adapter
1
Turn on the printer by pressing the P button.
2
Place roll paper on the roll rest on top of the
printer.
c
Important:
Insert the paper just before printing. The roller
may leave an impression on paper that is left in
the printer.
Note:
O The paper that can be used in the printer is detailed
in the following section.
U“Supported Media” on page 199
O When the optional Multifunction Scanner has been
attached to the printer using the dedicated stand,
raise the scanner until you hear a click.
Note:
O Closing the paper basket makes the work
easier.
T7270/T5270/T3270 U“Storing and
Opening” on page 48
T7270D/T5270D U“Storing” on page 51
O Leaving the poster board supports raised can
cause jams; lower all the supports before
proceeding. To lower the supports, grasp
them, pull them diagonally downward, and
then release.