User's Manual
Table Of Contents
- Introduction
- Basic Operations
- Loading and Removing the Roll Paper
- Loading and Removing Cut Sheets
- Loading and Removing Poster Board
- Viewing and Changing Media Settings
- Replacing Paper
- Using the Paper Basket (T7270/T5270/T3270)
- Using the Large-Capacity Paper Basket (T7270D/T5270D)
- Using the Auto Take-up Reel Unit (T7270 Only)
- Basic Printing Methods (Windows)
- Basic Printing Methods (OS X)
- Printable area
- Using the Power Off Timer
- Canceling Printing
- Saving to and Reprinting on the Optional Hard Disk Unit
- Copying and Scanning
- Print From Folder
- More Ways to Print
- Enlargements and Horizontal and Vertical Banners
- Printing at Non-Standard Sizes
- Printing CAD Drawings
- Switching Roll Paper Automatically before Printing (T7270D/T5270D Only)
- Borderless Printing
- Correct color and print
- Multi-Page/Poster Printing
- Printing Multiple Documents (the Layout Manager) (Windows Only)
- Color Management Printing
- Tips for Using the Printer Driver (Windows)
- Tips for Using the Printer Driver (OS X)
- Using the Control Panel Menu
- Maintenance
- Problem Solver
- Appendix
- Where To Get Help
- Software License Terms
Epson SureColor T-Series User’s Guide
Basic Operations
33
Loading Roll 2
(T7270D/T5270D only)
Buttons that are used in the following settings
1
Lower the paper basket to the horizontal
position.
U“Adjusting the Position” on page 52
2
Press the ( button on the control panel.
Use the d/u buttons to select Roll 2 and press
the Z button.
3
Hold the drawer handles of Roll 2 unit, and then
pull the unit out.
4
Confirm that the roll paper lock lever is raised.
5
Place the roll paper adapters on the adapter
guides so the flat surfaces of the adapters is
facing down. Next, following the adapter guides,
slide the roll slowly inside.
6
Make sure that the roll paper is free of slack and
the end is not folded, and then insert it into the
paper slot.
c
Important:
Do not pull out the Roll 2 unit unless you
are instructed to do so by the control panel
screen. If the unit is carelessly pulled out
while paper is loaded, paper jams or paper
damage may occur.