User's Manual
Table Of Contents
- Introduction
- Basic Operations
- Loading and Removing the Roll Paper
- Loading and Removing Cut Sheets
- Loading and Removing Poster Board
- Viewing and Changing Media Settings
- Replacing Paper
- Using the Paper Basket (T7270/T5270/T3270)
- Using the Large-Capacity Paper Basket (T7270D/T5270D)
- Using the Auto Take-up Reel Unit (T7270 Only)
- Basic Printing Methods (Windows)
- Basic Printing Methods (OS X)
- Printable area
- Using the Power Off Timer
- Canceling Printing
- Saving to and Reprinting on the Optional Hard Disk Unit
- Copying and Scanning
- Print From Folder
- More Ways to Print
- Enlargements and Horizontal and Vertical Banners
- Printing at Non-Standard Sizes
- Printing CAD Drawings
- Switching Roll Paper Automatically before Printing (T7270D/T5270D Only)
- Borderless Printing
- Correct color and print
- Multi-Page/Poster Printing
- Printing Multiple Documents (the Layout Manager) (Windows Only)
- Color Management Printing
- Tips for Using the Printer Driver (Windows)
- Tips for Using the Printer Driver (OS X)
- Using the Control Panel Menu
- Maintenance
- Problem Solver
- Appendix
- Where To Get Help
- Software License Terms
Epson SureColor T-Series User’s Guide
Basic Operations
39
8
Slide the Roll 2 unit back into the printer.
9
Lift the adapter lock levers to release the roll
paper adapters.
10
Remove the roll paper adapters.
After rewinding the roll paper carefully, store it
in the original package.
Loading and Removing
Cut Sheets
The procedure for loading and positioning cut sheets
varies with the thickness of the paper.
.003 to .03 inches (0.08 to 0.8 mm) U“Loading Cut
Sheets” on page 39
.03 to .06 inches (0.8 to 1.5 mm) U“Loading Poster
Board” on page 41
Loading Cut Sheets
c
Important:
If the paper is wavy or curled, flatten the paper
before loading it in the printer, or use new paper.
If wavy or curled paper is loaded, this printer may
not be able to recognize the paper size, feed the
paper, or print correctly.
We recommend that you return the paper to its
original package and store it flat, and take it out
of the package just before you use it.
c
Important:
Insert the paper just before printing. The pressure
rollers may leave impressions on paper that is left
in the printer.
Note:
The paper that can be used in the printer is detailed in
the following section.
U“Supported Media” on page 199