User's Manual
Table Of Contents
- Introduction
- Basic Operations
- Loading and Removing the Roll Paper
- Loading and Removing Cut Sheets
- Loading and Removing Poster Board
- Viewing and Changing Media Settings
- Replacing Paper
- Using the Paper Basket (T7270/T5270/T3270)
- Using the Large-Capacity Paper Basket (T7270D/T5270D)
- Using the Auto Take-up Reel Unit (T7270 Only)
- Basic Printing Methods (Windows)
- Basic Printing Methods (OS X)
- Printable area
- Using the Power Off Timer
- Canceling Printing
- Saving to and Reprinting on the Optional Hard Disk Unit
- Copying and Scanning
- Print From Folder
- More Ways to Print
- Enlargements and Horizontal and Vertical Banners
- Printing at Non-Standard Sizes
- Printing CAD Drawings
- Switching Roll Paper Automatically before Printing (T7270D/T5270D Only)
- Borderless Printing
- Correct color and print
- Multi-Page/Poster Printing
- Printing Multiple Documents (the Layout Manager) (Windows Only)
- Color Management Printing
- Tips for Using the Printer Driver (Windows)
- Tips for Using the Printer Driver (OS X)
- Using the Control Panel Menu
- Maintenance
- Problem Solver
- Appendix
- Where To Get Help
- Software License Terms
Epson SureColor T-Series User’s Guide
Basic Operations
40
Buttons that are used in the following settings
1
Turn on the printer by pressing the P button.
2
Press the ( button on the control panel. Press
the d/u button to highlight Cut Sheet and press
the Z button.
3
Feed the paper into the paper slot with the
printable surface toward you.
Insert the paper into the paper slot, keeping its
right edge aligned with the loading mark on the
roll paper cover. Slide the paper in until it stops.
4
Confirm that Press Z is displayed and press
the Z button.
The paper will be fed into the printer.
5
Check the media type.
The display shows the type of paper currently
selected with the printer. To print with the
displayed settings, use the d/u buttons to select
Keep Settings Above, and press the Z button.
To change the settings, select Change Settings,
and press the Z button.
U“Viewing and Changing Media Settings” on
page 45
Note:
O Closing the paper basket makes the work
easier.
T7270/T5270/T3270 U“Storing and
Opening” on page 48
T7270D/T5270D U“Storing” on page 51
O Leaving the poster board supports raised can
cause jams; lower all the supports before
proceeding. To lower the supports, grasp
them, pull them diagonally downward, and
then release.
c
Important:
Insert all paper in portrait orientation.
Inserting paper in landscape orientation
may cause a decline in print quality.